* To avoid spurious CDC ACM instances when usint CDC ACM for something
other than logging, move to the approach used by Zephyr of using a
snippet to redirect console output to a CDC ACM node added by the
snippet. Remove all the existing static CDC ACM nodes.
* Add new `zmk-usb-logging` snippet that mirrors the upstream
`cdc-acm-logging` snippet, but still does our extra USB logging
configuration.
* Updated logging docs accordingly.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Split the toolchain setup into separate docker and native pages
and improve instructions to better refer to Zephyr docs in certain steps.
Also refactor to improve consistency and add virtualenv instructions.
---------
Co-authored-by: KemoNine <mcrosson@kemonine.info>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Added a Kconfig option to enable SOC_DCDC_NRF52X_HV for nice_nano_v2
and mikoto. According to Nordic's documentation, the DC/DC regulator is
more efficient than the LDO regulator, so this is enabled by default.
The following boards do not support this mode and were not changed:
- nice_nano
- nice60
- nrfmicro_11, nrfmicro_13
- nrf52840_m2
- bluemicro840
I could not find schematics to confirm whether the following boards
support this mode:
- bt60_v1, bt60_v2
- bt65_v1
- bt75_v1
- corneish_zen_v1, corneish_zen_v2
- pillbug
- puchi_ble_v1
- s40nc
The devicetree pulls always add on to the extra pulls configured by toggle mode, so these should not have pulls defined in the devicetree. Saved ~200uA avg on another board with a 3t toggle switch
* In order to be sure the rest of the system is fully ready before
intializing, because init may result in immediate events being
triggered when used with toggle direct kscan inner devices.
This adds the following:
- A character map driver API, which maps Unicode code points to behavior
bindings.
- A zmk,character-map driver which implements this API. This driver is
designed for ROM efficiency, so it sends every value defined in the
map to one behavior and passes any code point not in the map through
to another. (A more flexible implementation that allows for a unique
behavior binding per character could be added later if necessary.)
- A zmk,send-string behavior, which users can define and bind to their
keymaps to send strings.
- A zmk_send_string() function, which queues the necessary behaviors
to type a UTF-8 string. This is separated from the send string
behavior since it could be used for other features such as Unicode
key sequences, behaviors that print dynamic messages, etc.
* Use the correct property for extra GPIOs to
make active for the waker before going into soft
off state.
* Change header depth for easier navigation of the
soft off feature page.
Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com>
* Add dedicated init priority for the sideband kscan.
* Refactor sideband code for clarity.
* Tweaks to direct kscan for clarity.
* Make sideband behavior row optional for brevity.
* Allow overriding ZMK Uno sideband behaviors.
