241 lines
9.5 KiB
C
241 lines
9.5 KiB
C
/*
|
|
* Copyright (c) 2020 The ZMK Contributors
|
|
*
|
|
* SPDX-License-Identifier: MIT
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT issi_is31fl3743a
|
|
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/gpio.h>
|
|
#include <zephyr/drivers/i2c.h>
|
|
#include <zephyr/drivers/led_strip.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/logging/log.h>
|
|
#include <zephyr/sys/math_extras.h>
|
|
#include <zephyr/sys/util.h>
|
|
|
|
LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
|
|
|
|
#define IS31FL3743A_REG_PS (0xfd)
|
|
#define IS31FL3743A_REG_PSWL (0xfe)
|
|
|
|
#define IS31FL3743A_PSWL_ENABLE (0xc5)
|
|
#define IS31FL3743A_PSWL_DISABLE (0x00)
|
|
|
|
#define IS31FL3743A_PAGE_PWM (0x00)
|
|
#define IS31FL3743A_PAGE_SCALING (0x01)
|
|
#define IS31FL3743A_PAGE_FUNCTION (0x02)
|
|
|
|
struct is31fl3743a_config {
|
|
char *label;
|
|
struct i2c_dt_spec i2c;
|
|
struct gpio_dt_spec gpio;
|
|
size_t px_buffer_size;
|
|
uint8_t gcc;
|
|
uint8_t sws;
|
|
uint8_t sync;
|
|
uint8_t *rgb_map;
|
|
uint8_t *gamma;
|
|
uint8_t scaling_red;
|
|
uint8_t scaling_green;
|
|
uint8_t scaling_blue;
|
|
};
|
|
|
|
struct is31fl3743a_data {
|
|
uint8_t *px_buffer;
|
|
};
|
|
|
|
static int is31fl3743a_reg_write(const struct device *dev, uint8_t addr, uint8_t value) {
|
|
const struct is31fl3743a_config *config = dev->config;
|
|
|
|
if (i2c_reg_write_byte_dt(&config->i2c, addr, value)) {
|
|
LOG_ERR("Failed writing value %x to register address %x on device %x.", value, addr,
|
|
config->i2c.addr);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int is31fl3743a_reg_burst_write(const struct device *dev, uint8_t start_addr,
|
|
const uint8_t *buffer, size_t num_bytes) {
|
|
const struct is31fl3743a_config *config = dev->config;
|
|
|
|
if (i2c_burst_write_dt(&config->i2c, start_addr, buffer, num_bytes)) {
|
|
LOG_ERR("Failed burst write with starting address %x.", start_addr);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int is31fl3743a_set_page(const struct device *dev, uint8_t page_addr) {
|
|
if (is31fl3743a_reg_write(dev, IS31FL3743A_REG_PSWL, IS31FL3743A_PSWL_ENABLE)) {
|
|
return -EIO;
|
|
}
|
|
|
|
if (is31fl3743a_reg_write(dev, IS31FL3743A_REG_PS, page_addr)) {
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline bool num_pixels_ok(const struct is31fl3743a_config *config, size_t num_pixels) {
|
|
size_t num_bytes;
|
|
|
|
const bool overflow = size_mul_overflow(num_pixels, 3, &num_bytes);
|
|
|
|
return !overflow && (num_bytes <= config->px_buffer_size);
|
|
}
|
|
|
|
/**
|
|
* Updates individual LED channels without an RGB interpretation.
|
|
*/
|
|
static int is31fl3743a_strip_update_channels(const struct device *dev, uint8_t *channels,
|
|
size_t num_channels) {
|
|
const struct is31fl3743a_config *config = dev->config;
|
|
|
|
if (config->px_buffer_size < num_channels) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
is31fl3743a_set_page(dev, IS31FL3743A_PAGE_PWM);
|
|
|
|
return is31fl3743a_reg_burst_write(dev, 0x01, channels, num_channels);
|
|
}
|
|
|
|
/*
|
|
* Updates the RGB LED matrix according to devicetree's map property.
|
|
*/
|
|
static int is31fl3743a_strip_update_rgb(const struct device *dev, struct led_rgb *pixels,
|
|
size_t num_pixels) {
|
|
const struct is31fl3743a_config *config = dev->config;
|
|
const struct is31fl3743a_data *data = dev->data;
|
|
|
|
size_t pixel_idx = 0;
|
|
size_t led_idx = 0;
|
|
|
|
if (!num_pixels_ok(config, num_pixels)) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
while (pixel_idx < num_pixels) {
|
|
data->px_buffer[config->rgb_map[led_idx++]] = config->gamma[pixels[pixel_idx].r];
|
|
data->px_buffer[config->rgb_map[led_idx++]] = config->gamma[pixels[pixel_idx].g];
|
|
data->px_buffer[config->rgb_map[led_idx++]] = config->gamma[pixels[pixel_idx].b];
|
|
|
|
++pixel_idx;
|
|
}
|
|
|
|
return is31fl3743a_strip_update_channels(dev, data->px_buffer, config->px_buffer_size);
|
|
}
|
|
|
|
/*
|
|
* Initiates a driver instance for IS31FL3743A.
|
|
*
|
|
* If available, SDB is pulled high to enable chip operation,
|
|
* followed by a reset to clear out all previous values.
|
|
*
|
|
* Function and scaling registers are then pre-configured based on devicetree settings.
|
|
*/
|
|
int static is31fl3743a_init(const struct device *dev) {
|
|
const struct is31fl3743a_config *config = dev->config;
|
|
const struct is31fl3743a_data *data = dev->data;
|
|
|
|
if (!device_is_ready(config->i2c.bus)) {
|
|
LOG_ERR("I2C device %s is not ready", config->i2c.bus->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!device_is_ready(config->gpio.port)) {
|
|
LOG_ERR("GPIO device for %s is not ready", config->label);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (gpio_pin_configure_dt(&config->gpio, GPIO_OUTPUT)) {
|
|
LOG_ERR("SDB pin for %s cannot be configured", config->label);
|
|
return -EIO;
|
|
}
|
|
|
|
if (gpio_pin_set_dt(&config->gpio, 1)) {
|
|
LOG_ERR("SDB pin for %s cannot be pulled high", config->label);
|
|
return -EIO;
|
|
}
|
|
|
|
// Reset settings
|
|
is31fl3743a_set_page(dev, IS31FL3743A_PAGE_FUNCTION);
|
|
is31fl3743a_reg_write(dev, 0x2f, 0xae);
|
|
|
|
// Set configuration & GCC registers
|
|
is31fl3743a_set_page(dev, IS31FL3743A_PAGE_FUNCTION);
|
|
is31fl3743a_reg_write(dev, 0x00, (config->sws << 4) | (0x01 << 3) | 0x01); // Configuration
|
|
is31fl3743a_reg_write(dev, 0x01, config->gcc); // GCC
|
|
|
|
// Set scaling registers
|
|
uint8_t *px_buffer = data->px_buffer;
|
|
uint8_t *rgb_map = config->rgb_map;
|
|
|
|
for (size_t i = 0; i < config->px_buffer_size; i += 3) {
|
|
px_buffer[rgb_map[i]] = config->scaling_red;
|
|
px_buffer[rgb_map[i + 1]] = config->scaling_green;
|
|
px_buffer[rgb_map[i + 2]] = config->scaling_blue;
|
|
}
|
|
|
|
is31fl3743a_set_page(dev, IS31FL3743A_PAGE_SCALING);
|
|
is31fl3743a_reg_burst_write(dev, 0x01, px_buffer, num_pixels);
|
|
|
|
// Re-initialize px_buffer to prevent any scaling values from sticking around
|
|
// when updating PWN registers during normal operation.
|
|
for (size_t i = 0; i < config->px_buffer_size; ++i) {
|
|
px_buffer[i] = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct led_strip_driver_api is31fl3743a_api = {
|
|
.update_rgb = is31fl3743a_strip_update_rgb,
|
|
.update_channels = is31fl3743a_strip_update_channels,
|
|
};
|
|
|
|
#define IS31FL3743A_BUFFER_SIZE(idx) \
|
|
IS31FL3743A_CS_PINS *(IS31FL3743A_SW_PINS - DT_INST_PROP(idx, sw_setting))
|
|
|
|
#define IS31FL3743A_GCC(idx) \
|
|
(DT_INST_PROP(idx, r_ext) * DT_INST_PROP(idx, led_max_current) * 256 * 256) / (343 * 255)
|
|
|
|
#define IS31FL3743A_DEVICE(idx) \
|
|
\
|
|
static uint8_t is31fl3743a_##idx##_px_buffer[IS31FL3743A_BUFFER_SIZE(idx)]; \
|
|
\
|
|
static struct is31fl3743a_data is31fl3743a_##idx##_data = { \
|
|
.px_buffer = is31fl3743a_##idx##_px_buffer, \
|
|
}; \
|
|
\
|
|
static uint8_t is31fl3743a_##idx##_rgb_map[IS31FL3743A_BUFFER_SIZE(idx)] = \
|
|
DT_INST_PROP(idx, map); \
|
|
\
|
|
static uint8_t is31fl3743a_##idx##_gamma[] = DT_INST_PROP(idx, gamma); \
|
|
\
|
|
static const struct is31fl3743a_config is31fl3743a_##idx##_config = { \
|
|
.label = DT_INST_LABEL(idx), \
|
|
.i2c = I2C_DT_SPEC_INST_GET(idx), \
|
|
.gpio = GPIO_DT_SPEC_INST_GET(idx, sdb_gpios), \
|
|
.px_buffer_size = IS31FL3743A_BUFFER_SIZE(idx), \
|
|
.gcc = IS31FL3743A_GCC(idx), \
|
|
.sws = DT_INST_PROP(idx, sw_setting), \
|
|
.sync = DT_INST_PROP(idx, sync), \
|
|
.rgb_map = is31fl3743a_##idx##_rgb_map, \
|
|
.gamma = is31fl3743a_##idx##_gamma, \
|
|
.scaling_red = DT_INST_PROP(idx, scaling_red), \
|
|
.scaling_green = DT_INST_PROP(idx, scaling_green), \
|
|
.scaling_blue = DT_INST_PROP(idx, scaling_blue), \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(idx, &is31fl3743a_init, NULL, &is31fl3743a_##idx##_data, \
|
|
&is31fl3743a_##idx##_config, POST_KERNEL, \
|
|
CONFIG_LED_STRIP_INIT_PRIORITY, &is31fl3743a_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(IS31FL3743A_DEVICE);
|