fix(bt): Fix compilation failure for clearing bonds.

* Refactor broke the build when clearing bonds on start.

.devcontainer/.bashrc

@@ -6,3 +6,8 @@ fi
 if [ -f "$WORKSPACE_DIR/zephyr/zephyr-env.sh" ]; then
   source "$WORKSPACE_DIR/zephyr/zephyr-env.sh"
 fi
+
+if [ -d "$WORKSPACE_DIR/tools/bsim" ]; then
+  export BSIM_OUT_PATH="$WORKSPACE_DIR/tools/bsim/"
+  export BSIM_COMPONENTS_PATH="$WORKSPACE_DIR/tools/bsim/components/"
+fi

.devcontainer/Dockerfile

@@ -1,4 +1,4 @@
-FROM docker.io/zmkfirmware/zmk-dev-arm:3.2
+FROM docker.io/zmkfirmware/zmk-dev-arm:3.5
 
 COPY .bashrc tmp
 RUN mv /tmp/.bashrc ~/.bashrc

.github/workflows/ble-test.yml

@@ -0,0 +1,78 @@
+name: BLE Tests
+
+on:
+  push:
+    paths:
+      - ".github/workflows/ble-test.yml"
+      - "app/tests/ble/**"
+      - "app/src/**"
+      - "app/run-ble-test.sh"
+  pull_request:
+    paths:
+      - ".github/workflows/ble-test.yml"
+      - "app/tests/ble/**"
+      - "app/src/**"
+      - "app/run-ble-test.sh"
+
+jobs:
+  collect-tests:
+    outputs:
+      test-dirs: ${{ steps.test-dirs.outputs.test-dirs }}
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Find test directories
+        id: test-dirs
+        run: |
+          cd app/tests/ble
+          export TESTS=$(ls -d * | grep -v central | jq -R -s -c 'split("\n")[:-1]')
+          echo "test-dirs=${TESTS}" > $GITHUB_OUTPUT
+  run-tests:
+    needs: collect-tests
+    strategy:
+      matrix:
+        test: ${{ fromJSON(needs.collect-tests.outputs.test-dirs) }}
+    runs-on: ubuntu-latest
+    container:
+      image: docker.io/zmkfirmware/zmk-build-arm:3.5
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Cache west modules
+        uses: actions/cache@v4
+        env:
+          cache-name: cache-zephyr-modules
+        with:
+          path: |
+            modules/
+            tools/
+            zephyr/
+            bootloader/
+          key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ hashFiles('app/west.yml') }}
+          restore-keys: |
+            ${{ runner.os }}-build-${{ env.cache-name }}-
+            ${{ runner.os }}-build-
+            ${{ runner.os }}-
+        timeout-minutes: 2
+        continue-on-error: true
+      - name: Initialize workspace (west init)
+        run: west init -l app
+      - name: Enable babblesim group filter
+        run: west config manifest.group-filter -- +babblesim
+      - name: Update modules (west update)
+        run: west update
+      - name: Export Zephyr CMake package (west zephyr-export)
+        run: west zephyr-export
+      - name: Build BabbleSim components
+        working-directory: tools/bsim
+        run: make everything
+      - name: Test ${{ matrix.test }}
+        working-directory: app
+        run: BSIM_COMPONENTS_PATH="${GITHUB_WORKSPACE}/tools/bsim/components" BSIM_OUT_PATH="${GITHUB_WORKSPACE}/tools/bsim" ./run-ble-test.sh tests/ble/${{ matrix.test }}
+      - name: Archive artifacts
+        if: ${{ always() }}
+        uses: actions/upload-artifact@v4
+        with:
+          name: "${{ matrix.test }}-log-files"
+          path: app/build/**/*.log

.github/workflows/build-user-config.yml

@@ -32,7 +32,7 @@ jobs:
       build_matrix: ${{ env.build_matrix }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Install yaml2json
         run: python3 -m pip install remarshal
@@ -52,33 +52,59 @@ jobs:
       fail-fast: false
       matrix: ${{ fromJson(needs.matrix.outputs.build_matrix) }}
     steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Create build directory
+        run: |
+          echo "build_dir=$(mktemp -d)" >> $GITHUB_ENV
+
       - name: Prepare variables
         shell: sh -x {0}
         env:
           board: ${{ matrix.board }}
           shield: ${{ matrix.shield }}
           artifact_name: ${{ matrix.artifact-name }}
+          snippet: ${{ matrix.snippet }}
         run: |
+          if [ -e zephyr/module.yml ]; then
+            export zmk_load_arg=" -DZMK_EXTRA_MODULES='${GITHUB_WORKSPACE}'"
+            new_tmp_dir="${TMPDIR:-/tmp}/zmk-config"
+            mkdir -p "${new_tmp_dir}"
+            echo "base_dir=${new_tmp_dir}" >> $GITHUB_ENV
+          else
+            echo "base_dir=${GITHUB_WORKSPACE}" >> $GITHUB_ENV
+          fi
+
+          if [ -n "${snippet}" ]; then
+            extra_west_args="-S \"${snippet}\""
+          fi
+
           echo "zephyr_version=${ZEPHYR_VERSION}" >> $GITHUB_ENV
-          echo "extra_cmake_args=${shield:+-DSHIELD=\"$shield\"}" >> $GITHUB_ENV
+          echo "extra_west_args=${extra_west_args}" >> $GITHUB_ENV
+          echo "extra_cmake_args=${shield:+-DSHIELD=\"$shield\"}${zmk_load_arg}" >> $GITHUB_ENV
           echo "display_name=${shield:+$shield - }${board}" >> $GITHUB_ENV
           echo "artifact_name=${artifact_name:-${shield:+$shield-}${board}-zmk}" >> $GITHUB_ENV
 
-      - name: Checkout
-        uses: actions/checkout@v3
+      - name: Copy config files to isolated temporary directory
+        run: |
+          if [ "${{ env.base_dir }}" != "${GITHUB_WORKSPACE}" ]; then
+            mkdir "${{ env.base_dir }}/${{ inputs.config_path }}"
+            cp -R ${{ inputs.config_path }}/* "${{ env.base_dir }}/${{ inputs.config_path }}/"
+          fi
 
       - name: Cache west modules
-        uses: actions/cache@v3.0.11
+        uses: actions/cache@v4
         continue-on-error: true
         env:
           cache_name: cache-zephyr-${{ env.zephyr_version }}-modules
         with:
           path: |
-            modules/
-            tools/
-            zephyr/
-            bootloader/
-            zmk/
+            ${{ env.base_dir }}/modules/
+            ${{ env.base_dir }}/tools/
+            ${{ env.base_dir }}/zephyr/
+            ${{ env.base_dir }}/bootloader/
+            ${{ env.base_dir }}/zmk/
           key: ${{ runner.os }}-build-${{ env.cache_name }}-${{ hashFiles('**/west.yml', '**/build.yaml') }}
           restore-keys: |
             ${{ runner.os }}-build-${{ env.cache_name }}-
@@ -86,23 +112,27 @@ jobs:
             ${{ runner.os }}-
 
       - name: West Init
-        run: west init -l "${{ inputs.config_path }}"
+        working-directory: ${{ env.base_dir }}
+        run: west init -l "${{ env.base_dir }}/${{ inputs.config_path }}"
 
       - name: West Update
+        working-directory: ${{ env.base_dir }}
         run: west update
 
       - name: West Zephyr export
+        working-directory: ${{ env.base_dir }}
         run: west zephyr-export
 
       - name: West Build (${{ env.display_name }})
+        working-directory: ${{ env.base_dir }}
         shell: sh -x {0}
-        run: west build -s zmk/app -b "${{ matrix.board }}" -- -DZMK_CONFIG="${GITHUB_WORKSPACE}/${{ inputs.config_path }}" ${{ env.extra_cmake_args }} ${{ matrix.cmake-args }}
+        run: west build -s zmk/app -d "${{ env.build_dir }}" -b "${{ matrix.board }}" ${{ env.extra_west_args }} -- -DZMK_CONFIG=${{ env.base_dir }}/${{ inputs.config_path }} ${{ env.extra_cmake_args }} ${{ matrix.cmake-args }}
 
       - name: ${{ env.display_name }} Kconfig file
         run: |
-          if [ -f build/zephyr/.config ]
+          if [ -f "${{ env.build_dir }}/zephyr/.config" ]
           then
-            grep -v -e "^#" -e "^$" build/zephyr/.config | sort
+            grep -v -e "^#" -e "^$" "${{ env.build_dir }}/zephyr/.config" | sort
           else
             echo "No Kconfig output"
           fi
@@ -110,12 +140,12 @@ jobs:
 
       - name: ${{ env.display_name }} Devicetree file
         run: |
-          if [ -f build/zephyr/zephyr.dts ]
+          if [ -f "${{ env.build_dir }}/zephyr/zephyr.dts" ]
           then
-            cat build/zephyr/zephyr.dts
-          elif [ -f build/zephyr/zephyr.dts.pre ]
+            cat "${{ env.build_dir }}/zephyr/zephyr.dts"
+          elif [ -f "${{ env.build_dir }}/zephyr/zephyr.dts.pre" ]
           then
-            cat -s build/zephyr/zephyr.dts.pre
+            cat -s "${{ env.build_dir }}/zephyr/zephyr.dts.pre"
           else
             echo "No Devicetree output"
           fi
@@ -124,17 +154,29 @@ jobs:
       - name: Rename artifacts
         shell: sh -x {0}
         run: |
-          mkdir build/artifacts
-          if [ -f build/zephyr/zmk.uf2 ]
+          mkdir "${{ env.build_dir }}/artifacts"
+          if [ -f "${{ env.build_dir }}/zephyr/zmk.uf2" ]
           then
-            cp build/zephyr/zmk.uf2 "build/artifacts/${{ env.artifact_name }}.uf2"
-          elif [ -f build/zephyr/zmk.${{ inputs.fallback_binary }} ]
+            cp "${{ env.build_dir }}/zephyr/zmk.uf2" "${{ env.build_dir }}/artifacts/${{ env.artifact_name }}.uf2"
+          elif [ -f "${{ env.build_dir }}/zephyr/zmk.${{ inputs.fallback_binary }}" ]
           then
-            cp "build/zephyr/zmk.${{ inputs.fallback_binary }}" "build/artifacts/${{ env.artifact_name }}.${{ inputs.fallback_binary }}"
+            cp "${{ env.build_dir }}/zephyr/zmk.${{ inputs.fallback_binary }}" "${{ env.build_dir }}/artifacts/${{ env.artifact_name }}.${{ inputs.fallback_binary }}"
           fi
 
       - name: Archive (${{ env.display_name }})
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
+        with:
+          name: artifact-${{ env.artifact_name }}
+          path: ${{ env.build_dir }}/artifacts
+
+  merge:
+    runs-on: ubuntu-latest
+    needs: build
+    name: Merge Output Artifacts
+    steps:
+      - name: Merge Artifacts
+        uses: actions/upload-artifact/merge@v4
         with:
           name: ${{ inputs.archive_name }}
-          path: build/artifacts
+          pattern: artifact-*
+          delete-merged: true

.github/workflows/build.yml

@@ -12,21 +12,29 @@ on:
   schedule:
     - cron: "22 4 * * *"
 
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}-${{ github.event_name == 'schedule' }}
+  cancel-in-progress: true
+
+permissions: {}
+
 jobs:
   build:
     if: ${{ always() }}
     runs-on: ubuntu-latest
     container:
-      image: docker.io/zmkfirmware/zmk-build-arm:3.2
+      image: docker.io/zmkfirmware/zmk-build-arm:3.5
     needs: compile-matrix
     strategy:
       matrix:
         include: ${{ fromJSON(needs.compile-matrix.outputs.include-list) }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Cache west modules
-        uses: actions/cache@v3.0.2
+        uses: actions/cache@v4
         env:
           cache-name: cache-zephyr-modules
         with:
@@ -49,19 +57,17 @@ jobs:
       - name: Export Zephyr CMake package (west zephyr-export)
         run: west zephyr-export
       - name: Use Node.js
-        uses: actions/setup-node@v2
+        uses: actions/setup-node@v4
         with:
           node-version: "14.x"
       - name: Install @actions/artifact
         run: npm install @actions/artifact
-      - name: Build and upload artifacts
-        uses: actions/github-script@v4
+      - name: Build
+        uses: actions/github-script@v7
         id: boards-list
         with:
           script: |
             const fs = require('fs');
-            const artifact = require('@actions/artifact');
-            const artifactClient = artifact.create();
 
             const execSync = require('child_process').execSync;
 
@@ -71,10 +77,39 @@ jobs:
 
             for (const shieldArgs of buildShieldArgs) {
               try {
-                const output = execSync(`west build -s app -p -b ${{ matrix.board }} -- ${shieldArgs.shield ? '-DSHIELD="' + shieldArgs.shield + '"' : ''} ${shieldArgs['cmake-args'] || ''}`);
-
                 console.log(`::group::${{ matrix.board}} ${shieldArgs.shield} Build`)
+
+                const output = execSync(`west build -s app -p -b ${{ matrix.board }} ${shieldArgs.snippet ? '-S ' + shieldArgs.snippet : ''} -- ${shieldArgs.shield ? '-DSHIELD="' + shieldArgs.shield + '"' : ''} ${shieldArgs['cmake-args'] || ''}`);
+
                 console.log(output.toString());
+              } catch (e) {
+                console.error(`::error::Failed to build ${{ matrix.board }} ${shieldArgs.shield} ${shieldArgs['cmake-args']}`);
+                console.error(e);
+                error = true;
+              } finally {
+                console.log('::endgroup::');
+              }
+            }
+
+            if (error) {
+              throw new Error('Failed to build one or more configurations');
+            }
+      - name: Upload artifacts
+        uses: actions/github-script@v7
+        continue-on-error: ${{ github.event_name == 'pull_request' }}
+        id: boards-upload
+        with:
+          script: |
+            const fs = require('fs');
+            const {default: artifact} = require('@actions/artifact');
+
+            const buildShieldArgs = JSON.parse(`${{ matrix.shieldArgs }}`);
+
+            let error = false;
+
+            for (const shieldArgs of buildShieldArgs) {
+              try {
+                console.log(`::group::${{ matrix.board}} ${shieldArgs.shield} Upload`)
 
                 const fileExtensions = ["hex", "uf2"];
 
@@ -90,9 +125,9 @@ jobs:
                 const cmakeName = shieldArgs['cmake-args'] ? '-' + (shieldArgs.nickname || shieldArgs['cmake-args'].split(' ').join('')) : '';
                 const artifactName = `${{ matrix.board }}${shieldArgs.shield ? '-' + shieldArgs.shield : ''}${cmakeName}-zmk`;
 
-                await artifactClient.uploadArtifact(artifactName, files, rootDirectory, options);
+                await artifact.uploadArtifact(artifactName, files, rootDirectory, options);
               } catch (e) {
-                console.error(`::error::Failed to build or upload ${{ matrix.board }} ${shieldArgs.shield} ${shieldArgs['cmake-args']}`);
+                console.error(`::error::Failed to upload ${{ matrix.board }} ${shieldArgs.shield} ${shieldArgs['cmake-args']}`);
                 console.error(e);
                 error = true;
               } finally {
@@ -104,14 +139,14 @@ jobs:
               throw new Error('Failed to build one or more configurations');
             }
   compile-matrix:
-    if: ${{ always() }}
+    if: ${{ !cancelled() }}
     runs-on: ubuntu-latest
     needs: [core-coverage, board-changes, nightly]
     outputs:
       include-list: ${{ steps.compile-list.outputs.result }}
     steps:
       - name: Join build lists
-        uses: actions/github-script@v4
+        uses: actions/github-script@v7
         id: compile-list
         with:
           script: |
@@ -135,6 +170,7 @@ jobs:
               perBoard[configuration.board].push({
                 shield: configuration.shield,
                 'cmake-args': configuration['cmake-args'],
+                snippet: configuration.snippet,
                 nickname: configuration.nickname
               })
             }
@@ -151,14 +187,16 @@ jobs:
       core-include: ${{ steps.core-list.outputs.result }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Use Node.js
-        uses: actions/setup-node@v2
+        uses: actions/setup-node@v4
         with:
           node-version: "14.x"
       - name: Install js-yaml
         run: npm install js-yaml
-      - uses: actions/github-script@v4
+      - uses: actions/github-script@v7
         id: core-list
         with:
           script: |
@@ -180,14 +218,14 @@ jobs:
       boards-include: ${{ steps.boards-list.outputs.result }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
       - name: Use Node.js
-        uses: actions/setup-node@v2
+        uses: actions/setup-node@v4
         with:
           node-version: "14.x"
       - name: Install js-yaml
         run: npm install js-yaml
-      - uses: actions/github-script@v4
+      - uses: actions/github-script@v7
         id: boards-list
         with:
           script: |
@@ -257,14 +295,14 @@ jobs:
               });
             }))).flat();
   nightly:
-    if: ${{ github.event_name == 'schedule' }}
+    if: ${{ github.event_name == 'schedule' && github.repository_owner == 'zmkfirmware' }}
     runs-on: ubuntu-latest
     needs: get-grouped-hardware
     outputs:
       nightly-include: ${{ steps.nightly-list.outputs.result }}
     steps:
       - name: Create nightly list
-        uses: actions/github-script@v4
+        uses: actions/github-script@v7
         id: nightly-list
         with:
           script: |
@@ -307,15 +345,17 @@ jobs:
       organized-metadata: ${{ steps.organize-metadata.outputs.result }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Use Node.js
-        uses: actions/setup-node@v2
+        uses: actions/setup-node@v4
         with:
           node-version: "14.x"
       - name: Install js-yaml
         run: npm install js-yaml
       - name: Aggregate Metadata
-        uses: actions/github-script@v4
+        uses: actions/github-script@v7
         id: aggregate-metadata
         with:
           script: |
@@ -333,7 +373,7 @@ jobs:
           result-encoding: string
 
       - name: Organize Metadata
-        uses: actions/github-script@v4
+        uses: actions/github-script@v7
         id: organize-metadata
         with:
           script: |
@@ -382,27 +422,32 @@ jobs:
     if: ${{ github.event_name != 'schedule' }}
     runs-on: ubuntu-latest
     outputs:
-      changed-files: ${{ steps.changed-files.outputs.all }}
+      changed-files: ${{ steps.changed-files.outputs.all_changed_files }}
       board-changes: ${{ steps.board-changes.outputs.result }}
       core-changes: ${{ steps.core-changes.outputs.result }}
     steps:
-      - uses: Ana06/get-changed-files@v2.0.0
+      - name: Checkout
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+      - uses: tj-actions/changed-files@v45
         id: changed-files
         with:
-          format: "json"
-      - uses: actions/github-script@v4
+          json: true
+          escape_json: false
+      - uses: actions/github-script@v7
         id: board-changes
         with:
           script: |
-            const changedFiles = JSON.parse(`${{ steps.changed-files.outputs.all }}`);
+            const changedFiles = JSON.parse(`${{ steps.changed-files.outputs.all_changed_files }}`);
             const boardChanges = changedFiles.filter(f => f.startsWith('app/boards'));
             return boardChanges.length ? 'true' : 'false';
           result-encoding: string
-      - uses: actions/github-script@v4
+      - uses: actions/github-script@v7
         id: core-changes
         with:
           script: |
-            const changedFiles = JSON.parse(`${{ steps.changed-files.outputs.all }}`);
+            const changedFiles = JSON.parse(`${{ steps.changed-files.outputs.all_changed_files }}`);
             const boardChanges = changedFiles.filter(f => f.startsWith('app/boards'));
             const appChanges = changedFiles.filter(f => f.startsWith('app'));
             const ymlChanges = changedFiles.includes('.github/workflows/build.yml');

.github/workflows/doc-checks.yml

@@ -14,7 +14,7 @@ jobs:
   lint:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: bahmutov/npm-install@v1
         with:
           working-directory: docs
@@ -24,7 +24,7 @@ jobs:
   typecheck:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: bahmutov/npm-install@v1
         with:
           working-directory: docs

.github/workflows/hardware-metadata-validation.yml

@@ -18,11 +18,11 @@ jobs:
   validate-metadata:
     runs-on: ubuntu-latest
     container:
-      image: docker.io/zmkfirmware/zmk-dev-arm:3.2
+      image: docker.io/zmkfirmware/zmk-dev-arm:3.5
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Install dependencies
-        run: pip install -r app/scripts/requirements.txt
+        run: pip install --break-system-packages -r app/scripts/requirements.txt
       - name: West init
         run: west init -l app
       - name: Update modules (west update)

.github/workflows/pre-commit.yml

@@ -8,8 +8,8 @@ jobs:
   pre-commit:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
-      - uses: actions/setup-python@v4
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
         with:
           python-version: 3.x
-      - uses: pre-commit/action@v3.0.0
+      - uses: pre-commit/action@v3.0.1

.github/workflows/test.yml

@@ -6,11 +6,13 @@ on:
       - ".github/workflows/test.yml"
       - "app/tests/**"
       - "app/src/**"
+      - "app/include/**"
   pull_request:
     paths:
       - ".github/workflows/test.yml"
       - "app/tests/**"
       - "app/src/**"
+      - "app/include/**"
 
 jobs:
   collect-tests:
@@ -19,13 +21,13 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
       - name: Find test directories
         id: test-dirs
         run: |
           cd app/tests/
-          export TESTS=$(ls -d * | jq -R -s -c 'split("\n")[:-1]')
-          echo "::set-output name=test-dirs::${TESTS}"
+          export TESTS=$(ls -d * | grep -v ble | jq -R -s -c 'split("\n")[:-1]')
+          echo "test-dirs=${TESTS}" >> $GITHUB_OUTPUT
   run-tests:
     needs: collect-tests
     strategy:
@@ -33,12 +35,12 @@ jobs:
         test: ${{ fromJSON(needs.collect-tests.outputs.test-dirs) }}
     runs-on: ubuntu-latest
     container:
-      image: docker.io/zmkfirmware/zmk-build-arm:3.2
+      image: docker.io/zmkfirmware/zmk-build-arm:3.5
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
       - name: Cache west modules
-        uses: actions/cache@v3.0.2
+        uses: actions/cache@v4
         env:
           cache-name: cache-zephyr-modules
         with:
@@ -65,7 +67,7 @@ jobs:
         run: west test tests/${{ matrix.test }}
       - name: Archive artifacts
         if: ${{ always() }}
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v4
         with:
-          name: "log-files"
+          name: "${{ matrix.test }}-log-files"
           path: app/build/**/*.log

.gitignore

@@ -5,5 +5,14 @@
 /zephyr
 /zmk-config
 /build
+
+# macOS
 *.DS_Store
-__pycache__
+
+# Python
+__pycache__
+.python-version
+.venv
+
+# clangd
+app/.cache/

.vscode/extensions.json

@@ -4,6 +4,7 @@
     "ms-python.python",
     "ms-vscode.cpptools",
     "plorefice.devicetree",
-    "twxs.cmake"
+    "twxs.cmake",
+    "unifiedjs.vscode-mdx"
   ]
 }

CONTRIBUTING.md

@@ -86,6 +86,12 @@ documentation to areas not currently covered are greatly appreciated.
 ZMK uses `prettier` to format documentation files. You can run prettier with `npm run prettier:format`.
 You can setup git to run prettier automatically when you commit by installing the pre-commit hooks: `pip3 install pre-commit`, `pre-commit install`.
 
+### Linting
+
+This repository utilizes ESLint for code linting to ensure consistent code style and identify potential errors or bugs early in the development process.
+
+You can run ESLint with `npm run lint` to verify your changes.
+
 ## Code Contributions
 
 ### Development Setup

app/CMakeLists.txt

@@ -2,32 +2,37 @@ cmake_minimum_required(VERSION 3.13.1)
 
 set(CONFIG_APPLICATION_DEFINED_SYSCALL true)
 
-# Add our custom Zephyr module for drivers w/ syscalls, etc.
-list(APPEND DTS_ROOT ${CMAKE_SOURCE_DIR}/drivers/zephyr)
-
-set(ZephyrBuildConfiguration_ROOT ${CMAKE_SOURCE_DIR}/cmake)
-
-list(APPEND ZEPHYR_EXTRA_MODULES
-  ${CMAKE_CURRENT_SOURCE_DIR}/module
-)
+set(ZEPHYR_EXTRA_MODULES "${ZMK_EXTRA_MODULES};${CMAKE_CURRENT_SOURCE_DIR}/module;${CMAKE_CURRENT_SOURCE_DIR}/keymap-module")
 
 # Find Zephyr. This also loads Zephyr's build system.
 find_package(Zephyr REQUIRED HINTS ../zephyr)
 project(zmk)
 
+zephyr_linker_sources(SECTIONS include/linker/zmk-behaviors.ld)
 zephyr_linker_sources(RODATA include/linker/zmk-events.ld)
 
+if(CONFIG_ZMK_BEHAVIOR_LOCAL_IDS)
+  zephyr_linker_sources(DATA_SECTIONS include/linker/zmk-behavior-local-id-map.ld)
+endif()
+
+zephyr_syscall_header(${APPLICATION_SOURCE_DIR}/include/drivers/behavior.h)
+zephyr_syscall_header(${APPLICATION_SOURCE_DIR}/include/drivers/ext_power.h)
+
 # Add your source file to the "app" target. This must come after
 # find_package(Zephyr) which defines the target.
 target_include_directories(app PRIVATE include)
 target_sources(app PRIVATE src/stdlib.c)
 target_sources(app PRIVATE src/activity.c)
-target_sources(app PRIVATE src/kscan.c)
+target_sources(app PRIVATE src/behavior.c)
+target_sources_ifdef(CONFIG_ZMK_KSCAN_SIDEBAND_BEHAVIORS app PRIVATE src/kscan_sideband_behaviors.c)
 target_sources(app PRIVATE src/matrix_transform.c)
+target_sources(app PRIVATE src/physical_layouts.c)
 target_sources(app PRIVATE src/sensors.c)
 target_sources_ifdef(CONFIG_ZMK_WPM app PRIVATE src/wpm.c)
 target_sources(app PRIVATE src/event_manager.c)
+target_sources_ifdef(CONFIG_ZMK_PM app PRIVATE src/pm.c)
 target_sources_ifdef(CONFIG_ZMK_EXT_POWER app PRIVATE src/ext_power_generic.c)
+target_sources_ifdef(CONFIG_ZMK_GPIO_KEY_WAKEUP_TRIGGER app PRIVATE src/gpio_key_wakeup_trigger.c)
 target_sources(app PRIVATE src/events/activity_state_changed.c)
 target_sources(app PRIVATE src/events/position_state_changed.c)
 target_sources(app PRIVATE src/events/sensor_event.c)
@@ -36,13 +41,14 @@ target_sources_ifdef(CONFIG_ZMK_WPM app PRIVATE src/events/wpm_state_changed.c)
 target_sources_ifdef(CONFIG_USB_DEVICE_STACK app PRIVATE src/events/usb_conn_state_changed.c)
 target_sources(app PRIVATE src/behaviors/behavior_reset.c)
 target_sources_ifdef(CONFIG_ZMK_EXT_POWER app PRIVATE src/behaviors/behavior_ext_power.c)
+target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_SOFT_OFF app PRIVATE src/behaviors/behavior_soft_off.c)
 if ((NOT CONFIG_ZMK_SPLIT) OR CONFIG_ZMK_SPLIT_ROLE_CENTRAL)
   target_sources(app PRIVATE src/hid.c)
   target_sources_ifdef(CONFIG_ZMK_MOUSE app PRIVATE src/mouse.c)
   target_sources(app PRIVATE src/behaviors/behavior_key_press.c)
   target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_KEY_TOGGLE app PRIVATE src/behaviors/behavior_key_toggle.c)
-  target_sources(app PRIVATE src/behaviors/behavior_hold_tap.c)
-  target_sources(app PRIVATE src/behaviors/behavior_sticky_key.c)
+  target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_HOLD_TAP app PRIVATE src/behaviors/behavior_hold_tap.c)
+  target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_STICKY_KEY app PRIVATE src/behaviors/behavior_sticky_key.c)
   target_sources(app PRIVATE src/behaviors/behavior_caps_word.c)
   target_sources(app PRIVATE src/behaviors/behavior_key_repeat.c)
   target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_MACRO app PRIVATE src/behaviors/behavior_macro.c)
@@ -57,6 +63,7 @@ if ((NOT CONFIG_ZMK_SPLIT) OR CONFIG_ZMK_SPLIT_ROLE_CENTRAL)
   target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_SENSOR_ROTATE_VAR app PRIVATE src/behaviors/behavior_sensor_rotate_var.c)
   target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_SENSOR_ROTATE_COMMON app PRIVATE src/behaviors/behavior_sensor_rotate_common.c)
   target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_MOUSE_KEY_PRESS app PRIVATE src/behaviors/behavior_mouse_key_press.c)
+  target_sources_ifdef(CONFIG_ZMK_BEHAVIOR_STUDIO_UNLOCK app PRIVATE src/behaviors/behavior_studio_unlock.c)
   target_sources(app PRIVATE src/combo.c)
   target_sources(app PRIVATE src/behaviors/behavior_tap_dance.c)
   target_sources(app PRIVATE src/behavior_queue.c)
@@ -68,6 +75,7 @@ if ((NOT CONFIG_ZMK_SPLIT) OR CONFIG_ZMK_SPLIT_ROLE_CENTRAL)
   target_sources(app PRIVATE src/events/layer_state_changed.c)
   target_sources(app PRIVATE src/events/modifiers_state_changed.c)
   target_sources(app PRIVATE src/events/keycode_state_changed.c)
+  target_sources_ifdef(CONFIG_ZMK_HID_INDICATORS app PRIVATE src/hid_indicators.c)
 
   if (CONFIG_ZMK_BLE)
     target_sources(app PRIVATE src/events/ble_active_profile_changed.c)
@@ -83,6 +91,8 @@ target_sources_ifdef(CONFIG_ZMK_BACKLIGHT app PRIVATE src/behaviors/behavior_bac
 target_sources_ifdef(CONFIG_ZMK_BATTERY_REPORTING app PRIVATE src/events/battery_state_changed.c)
 target_sources_ifdef(CONFIG_ZMK_BATTERY_REPORTING app PRIVATE src/battery.c)
 
+target_sources_ifdef(CONFIG_ZMK_HID_INDICATORS app PRIVATE src/events/hid_indicators_changed.c)
+
 target_sources_ifdef(CONFIG_ZMK_SPLIT app PRIVATE src/events/split_peripheral_status_changed.c)
 add_subdirectory(src/split)
 
@@ -90,9 +100,33 @@ target_sources_ifdef(CONFIG_USB_DEVICE_STACK app PRIVATE src/usb.c)
 target_sources_ifdef(CONFIG_ZMK_USB app PRIVATE src/usb_hid.c)
 target_sources_ifdef(CONFIG_ZMK_RGB_UNDERGLOW app PRIVATE src/rgb_underglow.c)
 target_sources_ifdef(CONFIG_ZMK_BACKLIGHT app PRIVATE src/backlight.c)
-target_sources(app PRIVATE src/workqueue.c)
+target_sources_ifdef(CONFIG_ZMK_LOW_PRIORITY_WORK_QUEUE app PRIVATE src/workqueue.c)
 target_sources(app PRIVATE src/main.c)
 
 add_subdirectory(src/display/)
+add_subdirectory_ifdef(CONFIG_SETTINGS src/settings/)
+
+if (CONFIG_ZMK_STUDIO_RPC)
+  # For some reason this is failing if run from a different sub-file.
+  list(APPEND CMAKE_MODULE_PATH ${ZEPHYR_BASE}/modules/nanopb)
+
+  include(nanopb)
+
+    # Turn off the default nanopb behavior
+  set(NANOPB_GENERATE_CPP_STANDALONE OFF)
+
+  nanopb_generate_cpp(proto_srcs proto_hdrs RELPATH ${ZEPHYR_ZMK_STUDIO_MESSAGES_MODULE_DIR}
+                        ${ZEPHYR_ZMK_STUDIO_MESSAGES_MODULE_DIR}/proto/zmk/studio.proto
+                        ${ZEPHYR_ZMK_STUDIO_MESSAGES_MODULE_DIR}/proto/zmk/meta.proto
+                        ${ZEPHYR_ZMK_STUDIO_MESSAGES_MODULE_DIR}/proto/zmk/core.proto
+                        ${ZEPHYR_ZMK_STUDIO_MESSAGES_MODULE_DIR}/proto/zmk/behaviors.proto
+                        ${ZEPHYR_ZMK_STUDIO_MESSAGES_MODULE_DIR}/proto/zmk/keymap.proto
+  )
+
+  target_include_directories(app PUBLIC ${CMAKE_CURRENT_BINARY_DIR})
+  target_sources(app PRIVATE ${proto_srcs} ${proto_hdrs})
+
+  add_subdirectory(src/studio)
+endif()
 
 zephyr_cc_option(-Wfatal-errors)

app/Kconfig

@@ -37,6 +37,17 @@ config BT_DIS_MODEL
 config BT_DIS_MANUF
     default "ZMK Project"
 
+# Hardware specific overrides
+
+if SOC_SERIES_NRF52X
+
+# Default on for our usage until boards implement retained bootmode.
+config NRF_STORE_REBOOT_TYPE_GPREGRET
+    bool
+    default y
+
+endif
+
 menu "HID"
 
 choice ZMK_HID_REPORT_TYPE
@@ -53,10 +64,19 @@ config ZMK_HID_REPORT_TYPE_NKRO
     help
       Enable full N-Key Roll Over for HID output. This selection will prevent the keyboard
       from working with some BIOS/UEFI versions that only support "boot keyboard" support.
-      This option also prevents using some infrequently used higher range HID usages.
+      This option also prevents using some infrequently used higher range HID usages (notably F13-F24 and INTL1-9)
+      These usages can be re enabled with ZMK_HID_KEYBOARD_NKRO_EXTENDED_REPORT.
 
 endchoice
 
+config ZMK_HID_KEYBOARD_NKRO_EXTENDED_REPORT
+    bool "Enable extended NKRO reporting"
+    depends on ZMK_HID_REPORT_TYPE_NKRO
+    help
+      Enables higher usage range for NKRO (F13-F24 and INTL1-9).
+      Please note this is not compatible with Android currently and you will get no input
+
+
 if ZMK_HID_REPORT_TYPE_HKRO
 
 config ZMK_HID_KEYBOARD_REPORT_SIZE
@@ -87,6 +107,18 @@ config ZMK_HID_CONSUMER_REPORT_USAGES_BASIC
 
 endchoice
 
+config ZMK_HID_INDICATORS
+    bool "HID Indicators"
+    help
+      Enable HID indicators, used for detecting state of Caps/Scroll/Num Lock,
+      Kata, and Compose.
+
+config ZMK_HID_SEPARATE_MOD_RELEASE_REPORT
+    bool "Release Modifiers Separately"
+    help
+      Send a separate release event for the modifiers, to make sure the release
+      of the modifier doesn't get recognized before the actual key's release event.
+
 menu "Output Types"
 
 config ZMK_USB
@@ -121,21 +153,48 @@ menuconfig ZMK_BLE
     select BT_SMP_APP_PAIRING_ACCEPT
     select BT_PERIPHERAL
     select BT_DIS
-    select BT_SETTINGS
-    select SETTINGS
-    imply ZMK_BATTERY_REPORTING
+    imply BT_SETTINGS if !ARCH_POSIX
+    imply SETTINGS if !ARCH_POSIX
+    imply ZMK_BATTERY_REPORTING if !ARCH_POSIX
 
 if ZMK_BLE
 
+config ZMK_BLE_EXPERIMENTAL_CONN
+    bool "Experimental BLE connection changes"
+    help
+      Enables a combination of settings that are planned to be default in future versions of ZMK
+      to improve connection stability. This includes changes to timing on BLE pairing initiation,
+      restores use of the updated/new LLCP implementation, and disables 2M PHY support.
+
+config ZMK_BLE_EXPERIMENTAL_SEC
+    bool "Experimental BLE security changes"
+    imply BT_SMP_ALLOW_UNAUTH_OVERWRITE
+    help
+      Enables a combination of settings that are planned to be officially supported in the future.
+      This includes enabling BT Secure Connection passkey entry, and allows overwrite of keys from
+      previously paired hosts.
+
+config ZMK_BLE_EXPERIMENTAL_FEATURES
+    bool "Experimental BLE connection and security settings/features"
+    select ZMK_BLE_EXPERIMENTAL_CONN
+    select ZMK_BLE_EXPERIMENTAL_SEC
+    help
+      Enables experimental connection changes and security features.
+
+config ZMK_BLE_PASSKEY_ENTRY
+    bool "Require passkey entry on the keyboard to complete pairing"
+    select RING_BUFFER
+
+config BT_SMP_ALLOW_UNAUTH_OVERWRITE
+    imply ZMK_BLE_PASSKEY_ENTRY
+
+config BT_CTLR_PHY_2M
+    default n if ZMK_BLE_EXPERIMENTAL_CONN
+
 # BT_TINYCRYPT_ECC is required for BT_SMP_SC_PAIR_ONLY when using HCI
 config BT_TINYCRYPT_ECC
     default y if BT_HCI && !BT_CTLR
 
-choice BT_LL_SW_LLCP_IMPL
-    default BT_LL_SW_LLCP_LEGACY
-
-endchoice
-
 config SYSTEM_WORKQUEUE_STACK_SIZE
     default 4096 if SOC_RP2040
     default 2048
@@ -162,23 +221,17 @@ config ZMK_BLE_MOUSE_REPORT_QUEUE_SIZE
 
 config ZMK_BLE_CLEAR_BONDS_ON_START
     bool "Configuration that clears all bond information from the keyboard on startup."
-    default n
 
 # HID GATT notifications sent this way are *not* picked up by Linux, and possibly others.
 config BT_GATT_NOTIFY_MULTIPLE
     default n
 
 config BT_GATT_AUTO_SEC_REQ
-    default n
+    default (ZMK_SPLIT_BLE && !ZMK_SPLIT_ROLE_CENTRAL)
 
 config BT_DEVICE_APPEARANCE
     default 961
 
-config ZMK_BLE_PASSKEY_ENTRY
-    bool "Require passkey entry on the keyboard to complete pairing"
-    default n
-    select RING_BUFFER
-
 config BT_PERIPHERAL_PREF_MIN_INT
     default 6
 
@@ -205,13 +258,36 @@ rsource "src/split/Kconfig"
 #Basic Keyboard Setup
 endmenu
 
+menu "Keymaps"
+
+config ZMK_KEYMAP_LAYER_REORDERING
+    bool "Layer Reordering Support"
+
+config ZMK_KEYMAP_SETTINGS_STORAGE
+    bool "Settings Save/Load"
+    depends on SETTINGS
+    depends on ZMK_BEHAVIOR_LOCAL_IDS
+
+if ZMK_KEYMAP_SETTINGS_STORAGE
+
+config ZMK_KEYMAP_LAYER_NAME_MAX_LEN
+    int "Max Layer Name Length"
+    default 20
+
+endif
+
+endmenu # Keymaps
+
+rsource "src/studio/Kconfig"
+
 menu "Display/LED Options"
 
 rsource "src/display/Kconfig"
 
 menuconfig ZMK_RGB_UNDERGLOW
-    bool "RGB Adressable LED Underglow"
+    bool "RGB Addressable LED Underglow"
     select LED_STRIP
+    select ZMK_LOW_PRIORITY_WORK_QUEUE
 
 if ZMK_RGB_UNDERGLOW
 
@@ -323,7 +399,6 @@ menu "Mouse Options"
 
 config ZMK_MOUSE
     bool "Enable ZMK mouse emulation"
-    default n
 
 #Mouse Options
 endmenu
@@ -332,16 +407,33 @@ menu "Power Management"
 
 config ZMK_BATTERY_REPORTING
     bool "Battery level detection/reporting"
-    default n
     select SENSOR
+    select ZMK_LOW_PRIORITY_WORK_QUEUE
     imply BT_BAS if ZMK_BLE
 
+if ZMK_BATTERY_REPORTING
+
+choice ZMK_BATTERY_REPORTING_FETCH_MODE
+    prompt "Battery Reporting Fetch Mode"
+
+config ZMK_BATTERY_REPORTING_FETCH_MODE_STATE_OF_CHARGE
+    bool "State of charge"
+
+config ZMK_BATTERY_REPORTING_FETCH_MODE_LITHIUM_VOLTAGE
+    bool "Lithium Voltage"
+
+endchoice
+endif
+
 config ZMK_IDLE_TIMEOUT
     int "Milliseconds of inactivity before entering idle state (OLED shutoff, etc)"
     default 30000
 
 config ZMK_SLEEP
     bool "Enable deep sleep support"
+    depends on HAS_POWEROFF
+    select POWEROFF
+    select ZMK_PM_DEVICE_SUSPEND_RESUME
     imply USB
 
 if ZMK_SLEEP
@@ -360,6 +452,26 @@ config ZMK_EXT_POWER
     bool "Enable support to control external power output"
     default y
 
+config ZMK_PM
+    bool
+
+config ZMK_PM_DEVICE_SUSPEND_RESUME
+    bool
+    select ZMK_PM
+
+config ZMK_PM_SOFT_OFF
+    bool "Soft-off support"
+    depends on HAS_POWEROFF
+    select ZMK_PM
+    select PM_DEVICE
+    select ZMK_PM_DEVICE_SUSPEND_RESUME
+    select POWEROFF
+
+config ZMK_GPIO_KEY_WAKEUP_TRIGGER
+    bool "Hardware supported wakeup (GPIO)"
+    default y
+    depends on DT_HAS_ZMK_GPIO_KEY_WAKEUP_TRIGGER_ENABLED && ZMK_PM_SOFT_OFF
+
 #Power Management
 endmenu
 
@@ -406,7 +518,11 @@ if USB_DEVICE_STACK
 
 config ZMK_USB_INIT_PRIORITY
     int "USB Init Priority"
-    default 50
+    default 94
+
+config ZMK_USB_HID_INIT_PRIORITY
+    int "USB HID Init Priority"
+    default 95
 
 #USB
 endif
@@ -436,6 +552,21 @@ config ZMK_KSCAN_EVENT_QUEUE_SIZE
 
 endif # ZMK_KSCAN
 
+config ZMK_KSCAN_SIDEBAND_BEHAVIORS
+    bool
+    default y
+    depends on DT_HAS_ZMK_KSCAN_SIDEBAND_BEHAVIORS_ENABLED
+    select KSCAN
+
+if ZMK_KSCAN_SIDEBAND_BEHAVIORS
+
+config ZMK_KSCAN_SIDEBAND_BEHAVIORS_INIT_PRIORITY
+    int "Keyboard scan sideband behaviors driver init priority"
+    # The default kscan init priority is 90, so be sure we are initialized later.
+    default 95
+
+endif # ZMK_KSCAN_SIDEBAND_BEHAVIORS
+
 menu "Logging"
 
 config ZMK_LOGGING_MINIMAL
@@ -516,6 +647,22 @@ endmenu
 
 if SETTINGS
 
+config ZMK_SETTINGS_RESET_ON_START
+    bool "Delete all persistent settings when the keyboard boots"
+
+if ZMK_SETTINGS_RESET_ON_START
+
+config ZMK_SETTINGS_RESET_ON_START_INIT_PRIORITY
+    int "Settings Reset ON Start Initialization Priority"
+    default 60
+    help
+      Initialization priority for the settings reset on start. Must be lower priority/
+      higher value than FLASH_INIT_PRIORITY if using the NVS/Flash settings backend.
+
+
+endif
+
+
 config ZMK_SETTINGS_SAVE_DEBOUNCE
     int "Milliseconds to debounce settings saves"
     default 60000
@@ -528,6 +675,11 @@ config ZMK_BATTERY_REPORT_INTERVAL
     int "Battery level report interval in seconds"
     default 60
 
+config ZMK_LOW_PRIORITY_WORK_QUEUE
+    bool "Work queue for low priority items"
+
+if ZMK_LOW_PRIORITY_WORK_QUEUE
+
 config ZMK_LOW_PRIORITY_THREAD_STACK_SIZE
     int "Low priority thread stack size"
     default 768
@@ -536,15 +688,14 @@ config ZMK_LOW_PRIORITY_THREAD_PRIORITY
     int "Low priority thread priority"
     default 10
 
+endif
+
 #Advanced
 endmenu
 
 #ZMK
 endmenu
 
-config HEAP_MEM_POOL_SIZE
-    default 8192
-
 config KERNEL_BIN_NAME
     default "zmk"
 
@@ -554,9 +705,11 @@ config REBOOT
 config USB_DEVICE_STACK
     default y if HAS_HW_NRF_USBD
 
+config FPU
+    default CPU_HAS_FPU
+
 config ZMK_WPM
     bool "Calculate WPM"
-    default n
 
 config ZMK_KEYMAP_SENSORS
     bool "Enable Keymap Sensors support"

app/Kconfig.behaviors

@@ -1,6 +1,68 @@
 # Copyright (c) 2023 The ZMK Contributors
 # SPDX-License-Identifier: MIT
 
+config ZMK_BEHAVIOR_METADATA
+    bool "Metadata"
+    help
+      Enabling this option adds APIs for documenting and fetching
+      metadata describing a behaviors name, and supported parameters.
+
+config ZMK_BEHAVIOR_LOCAL_IDS
+    bool "Local IDs"
+
+if ZMK_BEHAVIOR_LOCAL_IDS
+
+config ZMK_BEHAVIOR_LOCAL_IDS_IN_BINDINGS
+    bool "Track in behavior bindings"
+
+choice ZMK_BEHAVIOR_LOCAL_ID_TYPE
+    prompt "Local ID Type"
+
+config ZMK_BEHAVIOR_LOCAL_ID_TYPE_SETTINGS_TABLE
+    bool "Settings Table"
+    depends on SETTINGS
+    select ZMK_BEHAVIOR_LOCAL_IDS_IN_BINDINGS
+    help
+      Use persistent entries in the settings subsystem to identify
+      behaviors by local ID, which uses the device name to generate
+      a new settings entry tying a presistant local ID to that name.
+      This guarantees stable, colllision-free local IDs at the expense
+      of settings storage used.
+
+config ZMK_BEHAVIOR_LOCAL_ID_TYPE_CRC16
+    bool "CRC16 Hash"
+    select CRC
+    help
+      Use the CRC16-ANSI hash of behavior device names to generate
+      stable behavior local IDs. This saves on settings storage at
+      the expense of (highly unlikely) risk of collisions.
+
+endchoice
+
+endif
+
+
+config ZMK_BEHAVIOR_HOLD_TAP
+    bool
+    default y
+    depends on DT_HAS_ZMK_BEHAVIOR_HOLD_TAP_ENABLED
+
+if ZMK_BEHAVIOR_HOLD_TAP
+
+config ZMK_BEHAVIOR_HOLD_TAP_MAX_HELD
+    int "Hold Tap Max Held"
+    default 10
+    help
+      Max number of simultaneously held hold-taps
+
+config ZMK_BEHAVIOR_HOLD_TAP_MAX_CAPTURED_EVENTS
+    int "Hold Tap Max Captured Events"
+    default 40
+    help
+      Max number of captured system events while waiting to resolve hold taps
+
+endif
+
 config ZMK_BEHAVIOR_KEY_TOGGLE
     bool
     default y
@@ -12,9 +74,28 @@ config ZMK_BEHAVIOR_MOUSE_KEY_PRESS
     depends on DT_HAS_ZMK_BEHAVIOR_MOUSE_KEY_PRESS_ENABLED
     imply ZMK_MOUSE
 
+config ZMK_BEHAVIOR_STICKY_KEY
+    bool
+    default y
+    depends on DT_HAS_ZMK_BEHAVIOR_STICKY_KEY_ENABLED
+
+if ZMK_BEHAVIOR_STICKY_KEY
+
+config ZMK_BEHAVIOR_STICKY_KEY_MAX_HELD
+    int "Sticky Key Max Held"
+    default 10
+    help
+      Max number of simultaneously held sticky keys
+
+endif
+
+config ZMK_BEHAVIOR_SOFT_OFF
+    bool
+    default y
+    depends on DT_HAS_ZMK_BEHAVIOR_SOFT_OFF_ENABLED && ZMK_PM_SOFT_OFF
+
 config ZMK_BEHAVIOR_SENSOR_ROTATE_COMMON
     bool
-    default n
 
 config ZMK_BEHAVIOR_SENSOR_ROTATE
     bool
@@ -28,7 +109,12 @@ config ZMK_BEHAVIOR_SENSOR_ROTATE_VAR
     depends on DT_HAS_ZMK_BEHAVIOR_SENSOR_ROTATE_VAR_ENABLED
     select ZMK_BEHAVIOR_SENSOR_ROTATE_COMMON
 
+config ZMK_BEHAVIOR_STUDIO_UNLOCK
+    bool
+    default y
+    depends on DT_HAS_ZMK_BEHAVIOR_STUDIO_UNLOCK_ENABLED && ZMK_STUDIO
+
 config ZMK_BEHAVIOR_MACRO
     bool
     default y
-    depends on DT_HAS_ZMK_BEHAVIOR_MACRO_ENABLED || DT_HAS_ZMK_BEHAVIOR_MACRO_ONE_PARAM_ENABLED || DT_HAS_ZMK_BEHAVIOR_MACRO_TWO_PARAM_ENABLED
+    depends on DT_HAS_ZMK_BEHAVIOR_MACRO_ENABLED || DT_HAS_ZMK_BEHAVIOR_MACRO_ONE_PARAM_ENABLED || DT_HAS_ZMK_BEHAVIOR_MACRO_TWO_PARAM_ENABLED

app/boards/01space_rp2040_042lcd.overlay

@@ -4,6 +4,4 @@
  * SPDX-License-Identifier: MIT
  */
 
-#include "usb_console.dtsi"
-
 &xiao_serial { status = "disabled"; };

app/boards/adafruit_kb2040.overlay

@@ -4,6 +4,4 @@
  * SPDX-License-Identifier: MIT
  */
 
-#include "usb_console.dtsi"
-
 &pro_micro_serial { status = "disabled"; };

app/boards/adafruit_qt_py_rp2040.overlay

@@ -4,6 +4,4 @@
  * SPDX-License-Identifier: MIT
  */
 
-#include "usb_console.dtsi"
-
 &xiao_serial { status = "disabled"; };

app/boards/arm/adv360pro/Kconfig

@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: MIT
+
+config BOARD_ENABLE_DCDC
+    bool "Enable DCDC mode"
+    select SOC_DCDC_NRF52X
+    default y
+    depends on BOARD_ADV360PRO_LEFT || BOARD_ADV360PRO_RIGHT

app/boards/arm/adv360pro/Kconfig.board

@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+config BOARD_ADV360PRO_LEFT
+    bool "adv360pro_left"
+    depends on SOC_NRF52840_QIAA
+
+config BOARD_ADV360PRO_RIGHT
+    bool "adv360pro_right"
+    depends on SOC_NRF52840_QIAA

app/boards/arm/adv360pro/Kconfig.defconfig

@@ -0,0 +1,55 @@
+#
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+if BOARD_ADV360PRO_LEFT
+
+config ZMK_KEYBOARD_NAME
+    default "Adv360 Pro"
+
+config ZMK_SPLIT_ROLE_CENTRAL
+    default y
+
+endif # BOARD_ADV360PRO_LEFT
+
+if BOARD_ADV360PRO_RIGHT
+
+config ZMK_KEYBOARD_NAME
+    default "Adv360 Pro rt"
+
+endif # BOARD_ADV360PRO_RIGHT
+
+
+if BOARD_ADV360PRO_LEFT || BOARD_ADV360PRO_RIGHT
+
+config BOARD
+    default "adv360pro"
+
+config ZMK_SPLIT
+    default y
+
+config SPI
+    bool
+    default y
+
+config BT_CTLR
+    default BT
+
+if USB
+
+config USB_NRFX
+    default y
+
+config USB_DEVICE_STACK
+    default y
+
+endif # USB
+
+config ZMK_BATTERY_VOLTAGE_DIVIDER
+    default y
+
+config SPI
+    default y
+
+endif # BOARD_ADV360PRO_LEFT || BOARD_ADV360PRO_RIGHT

app/boards/arm/adv360pro/README.md

@@ -0,0 +1,7 @@
+# Kinesis Advantage 360 Professional
+
+This board definition provides upstream support for the [Kinesis Advantage 360 Professional](https://kinesis-ergo.com/keyboards/advantage360/)
+
+Kinesis offer a specific [custom configuration](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/) for the 360 Pro that references [a customised version of ZMK](https://github.com/ReFil/zmk/tree/adv360-z3.2-2) with Advantage 360 Pro specific functionality and changes over base ZMK. The Kinesis fork is regularly updated to bring the latest updates and changes from base ZMK however will not always be completely up to date, some features such as new keycodes will not be immediately available on the 360 Pro after they are implemented in base ZMK.
+
+When using this board definition some of the more advanced features (the indicator RGB leds) will not work, and Kinesis cannot provide customer service for usage of base ZMK. Likewise the ZMK community cannot provide support for either the Kinesis keymap editor, nor any usage of the Kinesis custom fork.

app/boards/arm/adv360pro/adv360pro-pinctrl.dtsi

@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ * SPDX-License-Identifier: MIT
+ */
+
+&pinctrl {
+    spi3_default: spi3_default {
+        group1 {
+            psels = <NRF_PSEL(SPIM_MOSI, 0, 20)>;
+        };
+    };
+
+    spi3_sleep: spi3_sleep {
+        group1 {
+            psels = <NRF_PSEL(SPIM_MOSI, 0, 20)>;
+            low-power-enable;
+        };
+    };
+    pwm0_default: pwm0_default {
+        group1 {
+            psels = <NRF_PSEL(PWM_OUT0, 0, 17)>;
+        };
+    };
+    pwm0_sleep: pwm0_sleep {
+        group1 {
+            psels = <NRF_PSEL(PWM_OUT0, 0, 17)>;
+            low-power-enable;
+        };
+    };
+};

app/boards/arm/adv360pro/adv360pro.dtsi

@@ -0,0 +1,155 @@
+/*
+*
+* Copyright (c) 2023 The ZMK Contributors
+* SPDX-License-Identifier: MIT
+*
+*/
+
+/dts-v1/;
+#include <nordic/nrf52840_qiaa.dtsi>
+
+#include <dt-bindings/led/led.h>
+#include <dt-bindings/zmk/matrix_transform.h>
+
+#include "adv360pro-pinctrl.dtsi"
+
+/ {
+    model = "Adv360 Pro";
+    compatible = "kinesis,adv360pro";
+
+    chosen {
+        zephyr,code-partition = &code_partition;
+        zephyr,sram = &sram0;
+        zephyr,flash = &flash0;
+        zmk,kscan = &kscan0;
+        zmk,backlight = &backlight;
+        zmk,battery = &vbatt;
+        zmk,matrix-transform = &default_transform;
+        zmk,underglow = &led_strip;
+    };
+
+    default_transform: keymap_transform_0 {
+        compatible = "zmk,matrix-transform";
+        columns = <20>;
+        rows = <5>;
+
+
+        map = <
+            RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5)  RC(4,6)                                                                        RC(4,13) RC(4,14) RC(4,15) RC(4,16) RC(4,17) RC(4,18) RC(4,19)
+            RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5)  RC(3,6)                                                                        RC(3,13) RC(3,14) RC(3,15) RC(3,16) RC(3,17) RC(3,18) RC(3,19)
+            RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5)  RC(2,6)           RC(2,8)  RC(2,9)            RC(2,10) RC(2,11)                RC(2,13) RC(2,14) RC(2,15) RC(2,16) RC(2,17) RC(2,18) RC(2,19)
+            RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5)                             RC(1,9)            RC(1,10)                                  RC(1,14) RC(1,15) RC(1,16) RC(1,17) RC(1,18) RC(1,19)
+            RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4)                     RC(0,7) RC(0,8) RC(0,9)            RC(0,10) RC(0,11) RC(0,12)                         RC(0,15) RC(0,16) RC(0,17) RC(0,18) RC(0,19)
+
+        >;
+    };
+
+    // Node name must match original "EXT_POWER" label to preserve user settings.
+    EXT_POWER {
+        compatible = "zmk,ext-power-generic";
+        control-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+    };
+
+    vbatt: vbatt {
+        compatible = "zmk,battery-voltage-divider";
+        io-channels = <&adc 2>;
+        output-ohms = <100000>;
+        full-ohms = <(100000 + 100000)>;
+    };
+
+    backlight: pwmleds {
+        compatible = "pwm-leds";
+        pwm_led_0 {
+            pwms = <&pwm0 0 10000 PWM_POLARITY_NORMAL>;
+        };
+    };
+
+};
+
+&pwm0 {
+    status = "okay";
+    pinctrl-0 = <&pwm0_default>;
+    pinctrl-1 = <&pwm0_sleep>;
+    pinctrl-names = "default", "sleep";
+};
+
+&adc {
+    status = "okay";
+};
+
+&gpiote {
+    status = "okay";
+};
+
+&gpio0 {
+    status = "okay";
+};
+
+&gpio1 {
+    status = "okay";
+};
+
+zephyr_udc0: &usbd {
+    status = "okay";
+};
+
+&flash0 {
+    /*
+     * For more information, see:
+     * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
+     */
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        sd_partition: partition@0 {
+            reg = <0x00000000 0x00026000>;
+        };
+        code_partition: partition@26000 {
+            reg = <0x00026000 0x000c6000>;
+        };
+
+        /*
+         * The flash starting at 0x000ec000 and ending at
+         * 0x000f3fff is reserved for use by the application.
+         */
+
+        /*
+         * Storage partition will be used by FCB/LittleFS/NVS
+         * if enabled.
+         */
+        storage_partition: partition@ec000 {
+            reg = <0x000ec000 0x00008000>;
+        };
+
+        boot_partition: partition@f4000 {
+            reg = <0x000f4000 0x0000c000>;
+        };
+    };
+};
+
+&spi3 {
+    compatible = "nordic,nrf-spim";
+    status = "okay";
+    pinctrl-0 = <&spi3_default>;
+    pinctrl-1 = <&spi3_sleep>;
+    pinctrl-names = "default", "sleep";
+
+    led_strip: ws2812@0 {
+        compatible = "worldsemi,ws2812-spi";
+
+        /* SPI */
+        reg = <0>;
+        spi-max-frequency = <4000000>;
+
+        /* WS2812 */
+        chain-length = <3>; /* number of LEDs */
+        spi-one-frame = <0x70>;
+        spi-zero-frame = <0x40>;
+
+        color-mapping = <LED_COLOR_ID_GREEN
+                        LED_COLOR_ID_RED
+                        LED_COLOR_ID_BLUE>;
+    };
+};

app/boards/arm/adv360pro/adv360pro.keymap

@@ -0,0 +1,48 @@
+#include <behaviors.dtsi>
+#include <dt-bindings/zmk/keys.h>
+#include <dt-bindings/zmk/bt.h>
+#include <dt-bindings/zmk/rgb.h>
+#include <dt-bindings/zmk/backlight.h>
+
+/ {
+    keymap {
+        compatible = "zmk,keymap";
+
+        default_layer {
+            bindings = <
+                &kp EQUAL &kp N1    &kp N2   &kp N3   &kp N4     &kp N5 &tog 1                                                           &mo 3 &kp N6 &kp N7 &kp N8    &kp N9   &kp N0   &kp MINUS
+                &kp TAB   &kp Q     &kp W    &kp E    &kp R      &kp T  &none                                                            &none &kp Y  &kp U  &kp I     &kp O    &kp P    &kp BSLH
+                &kp ESC   &kp A     &kp S    &kp D    &kp F      &kp G  &none           &kp LCTRL &kp LALT &kp LGUI  &kp RCTRL           &none &kp H  &kp J  &kp K     &kp L    &kp SEMI &kp SQT
+                &kp LSHFT &kp Z     &kp X    &kp C    &kp V      &kp B                            &kp HOME &kp PG_UP                           &kp N  &kp M  &kp COMMA &kp DOT  &kp FSLH &kp RSHFT
+                &mo 2     &kp GRAVE &kp CAPS &kp LEFT &kp RIGHT                &kp BSPC &kp DEL   &kp END  &kp PG_DN &kp ENTER &kp SPACE              &kp UP &kp DOWN  &kp LBKT &kp RBKT &mo 2
+            >;
+        };
+        keypad {
+            bindings = <
+                &kp EQUAL &kp N1    &kp N2   &kp N3   &kp N4     &kp N5 &trans                                                           &mo 3 &kp N6 &kp KP_NUM &kp KP_EQUAL &kp KP_DIVIDE &kp KP_MULTIPLY &kp MINUS
+                &kp TAB   &kp Q     &kp W    &kp E    &kp R      &kp T  &none                                                            &none &kp Y  &kp KP_N7  &kp KP_N8    &kp KP_N9     &kp KP_MINUS    &kp BSLH
+                &kp ESC   &kp A     &kp S    &kp D    &kp F      &kp G  &none           &kp LCTRL &kp LALT &kp LGUI  &kp RCTRL           &none &kp H  &kp KP_N4  &kp KP_N5    &kp KP_N6     &kp KP_PLUS     &kp SQT
+                &kp LSHFT &kp Z     &kp X    &kp C    &kp V      &kp B                            &kp HOME &kp PG_UP                           &kp N  &kp KP_N1  &kp KP_N2    &kp KP_N3     &kp KP_ENTER    &kp RSHFT
+                &mo 2     &kp GRAVE &kp CAPS &kp LEFT &kp RIGHT                &kp BSPC &kp DEL   &kp END  &kp PG_DN &kp ENTER &kp KP_N0              &kp UP     &kp DOWN     &kp KP_DOT    &kp RBKT        &mo 2
+            >;
+        };
+        fn {
+            bindings = <
+                &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &tog 1                                           &mo 3 &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12
+                &trans &trans &trans &trans &trans &trans  &none                                           &none &trans &trans &trans &trans  &trans  &trans
+                &trans &trans &trans &trans &trans &trans  &none        &trans &trans &trans &trans        &none &trans &trans &trans &trans  &trans  &trans
+                &trans &trans &trans &trans &trans &trans                      &trans &trans                     &trans &trans &trans &trans  &trans  &trans
+                &trans &trans &trans &trans &trans               &trans &trans &trans &trans &trans &trans              &trans &trans &trans  &trans  &trans
+            >;
+        };
+        mod {
+            bindings = <
+                &none &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &none                                                               &trans      &none &none      &none      &none &none &none
+                &none &none        &none        &none        &none        &none        &bootloader                                                         &bootloader &none &none      &none      &none &none &none
+                &none &none        &none        &none        &none        &none        &none             &none &none &bt BT_CLR &none                      &none       &none &none      &none      &none &none &none
+                &none &none        &none        &none        &none        &none                                &none &none                                             &none &none      &none      &none &none &none
+                &none &none        &none        &none        &none                                 &none &none &none &none      &bl BL_TOG &rgb_ug RGB_TOG                   &bl BL_INC &bl BL_DEC &none &none &none
+            >;
+        };
+    };
+};

app/boards/arm/adv360pro/adv360pro.yaml

@@ -0,0 +1,19 @@
+identifier: adv360pro
+name: Advantage 360 Pro
+type: keyboard
+arch: arm
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+supported:
+  - gpio
+  - i2c
+  - counter
+  - spi
+  - usb_device
+  - nvs
+  - can
+  - kscan
+  - ble
+  - pwm

app/boards/arm/adv360pro/adv360pro.zmk.yml

@@ -0,0 +1,16 @@
+file_format: "1"
+id: adv360pro
+name: Advantage 360 Pro
+type: board
+url: https://kinesis-ergo.com/keyboards/advantage360
+arch: arm
+features:
+  - keys
+  - underglow
+  - backlight
+outputs:
+  - usb
+  - ble
+siblings:
+  - adv360pro_left
+  - adv360pro_right

app/boards/arm/adv360pro/adv360pro_left.dts

@@ -0,0 +1,37 @@
+/*
+*
+* Copyright (c) 2023 The ZMK Contributors
+* SPDX-License-Identifier: MIT
+*
+*/
+
+#include "adv360pro.dtsi"
+
+/{
+    kscan0: kscan {
+        compatible = "zmk,kscan-gpio-matrix";
+        wakeup-source;
+
+        diode-direction = "col2row";
+        row-gpios
+            = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio1 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            ;
+
+        col-gpios
+            = <&gpio0 25 GPIO_ACTIVE_HIGH>
+            , <&gpio0 11 GPIO_ACTIVE_HIGH>
+            , <&gpio0 2 GPIO_ACTIVE_HIGH>
+            , <&gpio0 28 GPIO_ACTIVE_HIGH>
+            , <&gpio0 29 GPIO_ACTIVE_HIGH>
+            , <&gpio0 30 GPIO_ACTIVE_HIGH>
+            , <&gpio0 31 GPIO_ACTIVE_HIGH>
+            , <&gpio1 9 GPIO_ACTIVE_HIGH>
+            , <&gpio0 12 GPIO_ACTIVE_HIGH>
+            , <&gpio0 7 GPIO_ACTIVE_HIGH>
+            ;
+    };
+};

app/boards/arm/adv360pro/adv360pro_left_defconfig

@@ -0,0 +1,55 @@
+#
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+CONFIG_SOC_SERIES_NRF52X=y
+CONFIG_SOC_NRF52840_QIAA=y
+CONFIG_BOARD_ADV360PRO_LEFT=y
+
+# Enable MPU
+CONFIG_ARM_MPU=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+# Enable SPI for LEDS
+CONFIG_PINCTRL=y
+CONFIG_SPI=y
+CONFIG_SPI_NRFX=y
+
+# Enable writing to flash
+CONFIG_USE_DT_CODE_PARTITION=y
+CONFIG_MPU_ALLOW_FLASH_WRITE=y
+CONFIG_NVS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FLASH_MAP=y
+
+# Enable 32kHz crystal
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM=y
+
+#RGB leds config
+CONFIG_WS2812_STRIP=y
+CONFIG_ZMK_RGB_UNDERGLOW=y
+CONFIG_ZMK_RGB_UNDERGLOW_EXT_POWER=y
+CONFIG_ZMK_RGB_UNDERGLOW_ON_START=n
+CONFIG_ZMK_RGB_UNDERGLOW_EFF_START=0
+CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=y
+
+#Backlighting configuration
+CONFIG_PWM=y
+CONFIG_LED_PWM=y
+CONFIG_ZMK_BACKLIGHT=y
+CONFIG_ZMK_BACKLIGHT_BRT_START=20
+CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y
+
+#Misc configuration
+CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
+CONFIG_ZMK_HID_REPORT_TYPE_NKRO=y
+CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y
+CONFIG_BUILD_OUTPUT_UF2=y
+CONFIG_ZMK_USB=y
+CONFIG_ZMK_BLE=y

app/boards/arm/adv360pro/adv360pro_right.dts

@@ -0,0 +1,41 @@
+/*
+*
+* Copyright (c) 2023 The ZMK Contributors
+* SPDX-License-Identifier: MIT
+*
+*/
+
+#include "adv360pro.dtsi"
+
+/{
+    kscan0: kscan {
+        compatible = "zmk,kscan-gpio-matrix";
+        wakeup-source;
+
+        diode-direction = "col2row";
+        row-gpios
+            = <&gpio0 19 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio0 31 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio0 30 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            , <&gpio0 29 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+            ;
+
+        col-gpios
+            = <&gpio0  12 GPIO_ACTIVE_HIGH>
+            , <&gpio1  9 GPIO_ACTIVE_HIGH>
+            , <&gpio0  7 GPIO_ACTIVE_HIGH>
+            , <&gpio1  11 GPIO_ACTIVE_HIGH>
+            , <&gpio1  10 GPIO_ACTIVE_HIGH>
+            , <&gpio1  13 GPIO_ACTIVE_HIGH>
+            , <&gpio1  15 GPIO_ACTIVE_HIGH>
+            , <&gpio0 3 GPIO_ACTIVE_HIGH>
+            , <&gpio0 2 GPIO_ACTIVE_HIGH>
+            , <&gpio0 28 GPIO_ACTIVE_HIGH>
+            ;
+    };
+};
+
+&default_transform {
+    col-offset = <10>;
+};

app/boards/arm/adv360pro/adv360pro_right_defconfig

@@ -0,0 +1,54 @@
+#
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+CONFIG_SOC_SERIES_NRF52X=y
+CONFIG_SOC_NRF52840_QIAA=y
+CONFIG_BOARD_ADV360PRO_RIGHT=y
+
+# Enable MPU
+CONFIG_ARM_MPU=y
+
+# enable GPIO
+CONFIG_GPIO=y
+
+# Enable SPI for LEDS
+CONFIG_PINCTRL=y
+CONFIG_SPI=y
+CONFIG_SPI_NRFX=y
+
+# Enable writing to flash
+CONFIG_USE_DT_CODE_PARTITION=y
+CONFIG_MPU_ALLOW_FLASH_WRITE=y
+CONFIG_NVS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+CONFIG_FLASH_MAP=y
+
+# Enable 32kHz crystal
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM=y
+
+#RGB leds config
+CONFIG_WS2812_STRIP=y
+CONFIG_ZMK_RGB_UNDERGLOW=y
+CONFIG_ZMK_RGB_UNDERGLOW_EXT_POWER=y
+CONFIG_ZMK_RGB_UNDERGLOW_ON_START=n
+CONFIG_ZMK_RGB_UNDERGLOW_EFF_START=0
+CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=y
+
+#Backlighting configuration
+CONFIG_PWM=y
+CONFIG_LED_PWM=y
+CONFIG_ZMK_BACKLIGHT=y
+CONFIG_ZMK_BACKLIGHT_BRT_START=20
+CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y
+
+#Misc configuration
+CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
+CONFIG_ZMK_HID_REPORT_TYPE_NKRO=y
+CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y
+CONFIG_BUILD_OUTPUT_UF2=y
+CONFIG_ZMK_BLE=y

app/boards/arm/adv360pro/board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
+
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/adv360pro/pre_dt_board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2024 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+# Suppresses duplicate unit-address warning at build time for power, clock, acl and flash-controller
+# https://docs.zephyrproject.org/latest/build/dts/intro-input-output.html
+
+list(APPEND EXTRA_DTC_FLAGS "-Wno-unique_unit_address_if_enabled")

app/boards/arm/bdn9/bdn9_rev2.dts

@@ -16,14 +16,12 @@
     chosen {
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
         zmk,kscan = &kscan;
         zmk,underglow = &led_strip;
     };
 
     kscan: kscan {
         compatible = "zmk,kscan-gpio-direct";
-        label = "KSCAN";
 
         input-gpios
             = <&gpiob 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
@@ -40,7 +38,6 @@
 
     left_encoder: encoder_left {
         compatible = "alps,ec11";
-        label = "LEFT_ENCODER";
         a-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpioa 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -48,7 +45,6 @@
     };
     mid_encoder: encoder_mid {
         compatible = "alps,ec11";
-        label = "MID_ENCODER";
         a-gpios = <&gpioa 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpioa 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -56,7 +52,6 @@
     };
     right_encoder: encoder_right {
         compatible = "alps,ec11";
-        label = "RIGHT_ENCODER";
         a-gpios = <&gpioa 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpiob 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -78,7 +73,6 @@
 
     led_strip: ws2812@0 {
         compatible = "worldsemi,ws2812-spi";
-        label = "WS2812";
 
         /* SPI */
         reg = <0>; /* ignored, but necessary for SPI bindings */
@@ -111,14 +105,13 @@
     apb1-prescaler = <1>;
 };
 
-&usb {
+zephyr_udc0: &usb {
     status = "okay";
     pinctrl-0 = <&usb_dm_pa11 &usb_dp_pa12>;
     pinctrl-names = "default";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
+
+    // Overridden to lower RAM usage.
+    num-bidir-endpoints = <4>;
 };
 
 &rtc {
@@ -137,7 +130,6 @@
 
         /* Set 6Kb of storage at the end of the 128Kb of flash */
         storage_partition: partition@1e800 {
-            label = "storage";
             reg = <0x0001e800 0x00001800>;
         };
     };

app/boards/arm/bdn9/bdn9_rev2.keymap

@@ -4,6 +4,8 @@
  * SPDX-License-Identifier: MIT
  */
 
+#undef ZMK_BEHAVIORS_KEEP_ALL
+
 #include <behaviors.dtsi>
 #include <dt-bindings/zmk/keys.h>
 

app/boards/arm/bdn9/bdn9_rev2_defconfig

@@ -5,9 +5,6 @@ CONFIG_SOC_STM32F072XB=y
 # 72MHz system clock
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000
 
-# Floating Point Options
-CONFIG_FPU=y
-
 # enable GPIO
 CONFIG_GPIO=y
 
@@ -17,10 +14,9 @@ CONFIG_PINCTRL=y
 # Poll to avoid interrupt overlap issues
 CONFIG_ZMK_KSCAN_DIRECT_POLLING=y
 
-# Needed to reduce this to size that will fit on F072
-CONFIG_HEAP_MEM_POOL_SIZE=1024
+CONFIG_ISR_STACK_SIZE=1024
 
 # clock configuration
 CONFIG_CLOCK_CONTROL=y
 
-CONFIG_ZMK_USB=y
+CONFIG_ZMK_USB=y

app/boards/arm/blackpill_f401cc/blackpill_f401cc.zmk.yml

@@ -0,0 +1,9 @@
+file_format: "1"
+id: blackpill_f401cc
+name: BlackPill F401CC
+type: board
+arch: arm
+outputs:
+  - usb
+url: https://github.com/WeActStudio/WeActStudio.MiniSTM32F4x1
+exposes: [blackpill]

app/boards/arm/bluemicro840/arduino_pro_micro_pins.dtsi

@@ -53,5 +53,5 @@
 
 pro_micro_d: &pro_micro {};
 pro_micro_i2c: &i2c0 {};
-pro_micro_spi: &spi0 {};
+pro_micro_spi: &spi1 {};
 pro_micro_serial: &uart0 {};

app/boards/arm/bluemicro840/bluemicro840_v1-pinctrl.dtsi

@@ -36,4 +36,21 @@
             low-power-enable;
         };
     };
+
+    spi1_default: spi1_default {
+        group1 {
+            psels = <NRF_PSEL(SPIM_SCK, 1, 13)>,
+                <NRF_PSEL(SPIM_MOSI, 0, 28)>,
+                <NRF_PSEL(SPIM_MISO, 0, 3)>;
+        };
+    };
+
+    spi1_sleep: spi1_sleep {
+        group1 {
+            psels = <NRF_PSEL(SPIM_SCK, 1, 13)>,
+                <NRF_PSEL(SPIM_MOSI, 0, 28)>,
+                <NRF_PSEL(SPIM_MISO, 0, 3)>;
+            low-power-enable;
+        };
+    };
 };

app/boards/arm/bluemicro840/bluemicro840_v1.dts

@@ -17,7 +17,6 @@
         zephyr,code-partition = &code_partition;
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
         zmk,battery = &vbatt;
     };
 
@@ -25,20 +24,18 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
-    ext-power {
+    // Node name must match original "EXT_POWER" label to preserve user settings.
+    EXT_POWER {
         compatible = "zmk,ext-power-generic";
-        label = "EXT_POWER";
         init-delay-ms = <20>;
         control-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "BATTERY";
         io-channels = <&adc 7>;
         output-ohms = <2000000>;
         full-ohms = <(2000000 + 806000)>;
@@ -69,6 +66,13 @@
     pinctrl-names = "default", "sleep";
 };
 
+&spi1 {
+    compatible = "nordic,nrf-spim";
+    pinctrl-0 = <&spi1_default>;
+    pinctrl-1 = <&spi1_sleep>;
+    pinctrl-names = "default", "sleep";
+};
+
 &uart0 {
     compatible = "nordic,nrf-uarte";
     current-speed = <115200>;
@@ -77,12 +81,8 @@
     pinctrl-names = "default", "sleep";
 };
 
-&usbd {
+zephyr_udc0: &usbd {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
 };
 
 
@@ -97,11 +97,9 @@
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "softdevice";
             reg = <0x00000000 0x00026000>;
         };
         code_partition: partition@26000 {
-            label = "code_partition";
             reg = <0x00026000 0x000c6000>;
         };
 
@@ -115,12 +113,10 @@
          * if enabled.
          */
         storage_partition: partition@ec000 {
-            label = "storage";
             reg = <0x000ec000 0x00008000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };

app/boards/arm/bluemicro840/board.cmake

@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: MIT
 
 board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
-include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/bluemicro840/pre_dt_board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2024 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+# Suppresses duplicate unit-address warning at build time for power, clock, acl and flash-controller
+# https://docs.zephyrproject.org/latest/build/dts/intro-input-output.html
+
+list(APPEND EXTRA_DTC_FLAGS "-Wno-unique_unit_address_if_enabled")

app/boards/arm/bt60/board.cmake

@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: MIT
 
 board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
-include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/bt60/bt60.dtsi

@@ -16,10 +16,9 @@
         zephyr,code-partition = &code_partition;
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
         zmk,battery = &vbatt;
         zmk,kscan = &kscan0;
-        zmk,matrix_transform = &default_transform;
+        zmk,matrix-transform = &default_transform;
     };
 
     sensors: sensors {
@@ -32,7 +31,6 @@
 
     left_encoder: encoder_left {
         compatible = "alps,ec11";
-        label = "LEFT_ENCODER";
         a-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -44,13 +42,11 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "BATTERY";
         io-channels = <&adc 2>;
         output-ohms = <2000000>;
         full-ohms = <(2000000 + 806000)>;
@@ -73,24 +69,8 @@
     status = "okay";
 };
 
-&i2c0 {
-    compatible = "nordic,nrf-twi";
-    sda-pin = <17>;
-    scl-pin = <20>;
-};
-
-&uart0 {
-    compatible = "nordic,nrf-uarte";
-    tx-pin = <6>;
-    rx-pin = <8>;
-};
-
-&usbd {
+zephyr_udc0: &usbd {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
 };
 
 
@@ -105,11 +85,9 @@
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "softdevice";
             reg = <0x00000000 0x00026000>;
         };
         code_partition: partition@26000 {
-            label = "code_partition";
             reg = <0x00026000 0x000c6000>;
         };
 
@@ -123,12 +101,10 @@
          * if enabled.
          */
         storage_partition: partition@ec000 {
-            label = "storage";
             reg = <0x000ec000 0x00008000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };

app/boards/arm/bt60/bt60_v1.dts

@@ -11,7 +11,7 @@
 / {
     chosen {
         zmk,kscan = &kscan0;
-        zmk,matrix_transform = &ansi_transform;
+        zmk,matrix-transform = &ansi_transform;
     };
 
     ansi_transform: keymap_transform_0 {
@@ -81,7 +81,8 @@
 
     kscan0: kscan_0 {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
+
         diode-direction = "col2row";
 
         col-gpios

app/boards/arm/bt60/bt60_v1.keymap

@@ -13,15 +13,15 @@
 / {
     chosen {
     #ifdef ANSI
-        zmk,matrix_transform = &ansi_transform;
+        zmk,matrix-transform = &ansi_transform;
     #elif defined(HHKB)
-        zmk,matrix_transform = &hhkb_transform;
+        zmk,matrix-transform = &hhkb_transform;
     #elif defined(ISO)
-        zmk,matrix_transform = &iso_transform;
+        zmk,matrix-transform = &iso_transform;
     #elif defined(ALL_1U)
-        zmk,matrix_transform = &all_1u_transform;
+        zmk,matrix-transform = &all_1u_transform;
     #else
-        zmk,matrix_transform = &split_transform;
+        zmk,matrix-transform = &split_transform;
     #endif
     };
 
@@ -31,7 +31,7 @@
         #ifdef ANSI
         default_layer {
                 // ------------------------------------------------------------------------------------------
-                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
+                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   |
                 // |  TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   |    |
                 // |  CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    ENTER    |
                 // |  SHIFT    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   |      SHIFT     |
@@ -94,7 +94,7 @@
         #elif defined(ISO)
         default_layer {
                 // ------------------------------------------------------------------------------------------
-                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
+                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   |
                 // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |         |
                 // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |  #   | ENTER |
                 // |  SHIFT | |  |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   |     SHIFT    |
@@ -122,7 +122,7 @@
         #elif defined(ALL_1U)
         default_layer {
                 // ------------------------------------------------------------------------------------------
-                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
+                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   |
                 // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   "|"   |
                 // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
                 // |  SHIFT    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   | SHFT | UP | 1  |
@@ -150,7 +150,7 @@
         #else
         default_layer {
                 // ------------------------------------------------------------------------------------------
-                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BKSP| DEL |
+                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BSPC| DEL |
                 // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \    |
                 // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
                 // |  SHIFT    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   |   SHIFT  |  1  |

app/boards/arm/bt60/bt60_v1_hs.dts

@@ -11,7 +11,7 @@
 / {
     chosen {
         zmk,kscan = &kscan0;
-        zmk,matrix_transform = &default_transform;
+        zmk,matrix-transform = &default_transform;
     };
 
     default_transform: keymap_transform_0 {
@@ -30,7 +30,8 @@
 
     kscan0: kscan_0 {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
+
         diode-direction = "col2row";
 
         col-gpios

app/boards/arm/bt60/bt60_v1_hs.keymap

@@ -8,7 +8,7 @@
 
         default_layer {
                 // ------------------------------------------------------------------------------------------
-                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   | DEL
+                // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   | DEL
                 // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   |    |
                 // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
                 // |  SHIFT    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   |      SHIFT     |

app/boards/arm/bt60/pre_dt_board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2024 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+# Suppresses duplicate unit-address warning at build time for power, clock, acl and flash-controller
+# https://docs.zephyrproject.org/latest/build/dts/intro-input-output.html
+
+list(APPEND EXTRA_DTC_FLAGS "-Wno-unique_unit_address_if_enabled")

app/boards/arm/ckp/board.cmake

@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: MIT
 
 board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/ckp/bt60_v2.dts

@@ -13,7 +13,7 @@
   compatible = "polarityworks,bt60_v2";
 
   chosen {
-    zmk,matrix_transform = &ansi_transform;
+    zmk,matrix-transform = &ansi_transform;
   };
 
 

app/boards/arm/ckp/bt60_v2.keymap

@@ -12,13 +12,13 @@
 / {
   chosen {
   #ifdef ANSI
-    zmk,matrix_transform = &ansi_transform;
+    zmk,matrix-transform = &ansi_transform;
   #elif defined(ISO)
-    zmk,matrix_transform = &iso_transform;
+    zmk,matrix-transform = &iso_transform;
   #elif defined(ALL_1U)
-    zmk,matrix_transform = &all_1u_transform;
+    zmk,matrix-transform = &all_1u_transform;
   #elif defined(HHKB)
-    zmk,matrix_transform = &hhkb_transform;
+    zmk,matrix-transform = &hhkb_transform;
   #else
   #error "Layout not defined, please define a layout by uncommenting the appropriate line in bt60_v2.keymap"
   #endif
@@ -29,7 +29,7 @@
     #ifdef ANSI
     default_layer {
         // ------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   |
         // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \     |
         // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
         // |  SHIFT    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   |      SHIFT     |
@@ -65,7 +65,7 @@
     #elif defined(ISO)
     default_layer {
         // ------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |    BKSP   |
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |    BSPC   |
         // |   TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |        |
         // |  CAPS   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |  #  | ENTER |
         // | SHIFT |  \  |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   |     SHIFT     |
@@ -101,7 +101,7 @@
     #elif defined(ALL_1U)
     default_layer {
         // ------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BKSP | DEL |
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BSPC | DEL |
         // | TAB   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \    |
         // | CAPS   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
         // | SHFT  |NONE|  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   | SHFT | UP |  1 |
@@ -118,7 +118,7 @@
     };
     raise {
         // ------------------------------------------------------------------------------------------
-        // |GRAVE| F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |BKSP | DEL |
+        // |GRAVE| F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |BSPC | DEL |
         // | TAB  |  Q  |  W  |  E  | HUI | HUD |  Y  |  U  | INS |  O  |PSCRN| SLCK| P_B | RGB_TOG  |
         // | CAPS  |  A  |  S  |  D  | BRI | BRD |  H  |  J  |  K  |  L  | HOME| PGUP|      BOOT     |
         // | SHFT |NONE|VOLDN|VOLUP|MUTE|BLINC|BLDEC|  N  |  M  |  ,  | END | PGDN | SHFT|BL_TOG| 1  |
@@ -136,7 +136,7 @@
     #elif defined(HHKB)
     default_layer {
         // ------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   |
         // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \     |
         // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
         // |  SHIFT    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  | /   |      SHIFT     |

app/boards/arm/ckp/bt65_v1.dts

@@ -13,7 +13,7 @@
   compatible = "polarityworks,bt65_v1";
 
   chosen {
-    zmk,matrix_transform = &ansi_transform;
+    zmk,matrix-transform = &ansi_transform;
   };
 
 

app/boards/arm/ckp/bt65_v1.keymap

@@ -12,13 +12,13 @@
 / {
   chosen {
   #ifdef ANSI
-    zmk,matrix_transform = &ansi_transform;
+    zmk,matrix-transform = &ansi_transform;
   #elif defined(ISO)
-    zmk,matrix_transform = &iso_transform;
+    zmk,matrix-transform = &iso_transform;
   #elif defined(ALL_1U)
-    zmk,matrix_transform = &all_1u_transform;
+    zmk,matrix-transform = &all_1u_transform;
   #elif defined(HHKB)
-    zmk,matrix_transform = &hhkb_transform;
+    zmk,matrix-transform = &hhkb_transform;
   #else
   #error "Layout not defined, please define a layout by uncommenting the appropriate line in bt65_v1.keymap"
   #endif
@@ -29,7 +29,7 @@
     #ifdef ANSI
     default_layer {
         // ------------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   | DEL |
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   | DEL |
         // | TAB   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    | INS |
         // | CAPS   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    ENTER    | PGUP|
         // |  SHIFT   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |   SHIFT   | UP  | PGDN|
@@ -37,7 +37,7 @@
         // ------------------------------------------------------------------------------------------------
       bindings = <
 
-        &kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BKSP &kp DEL
+        &kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BSPC &kp DEL
         &kp TAB   &kp Q  &kp W  &kp E  &kp R  &kp T  &kp Y  &kp U  &kp  I    &kp  O  &kp  P   &kp LBKT &kp RBKT &kp BSLH &kp INS
         &kp CLCK   &kp A  &kp S  &kp D  &kp F  &kp G  &kp H  &kp J  &kp  K    &kp  L  &kp SEMI &kp SQT         &kp RET &kp PG_UP
         &kp LSHFT     &kp Z  &kp X  &kp C  &kp V  &kp B  &kp N  &kp M  &kp COMMA &kp DOT &kp FSLH   &kp RSHFT   &kp UP &kp PG_DN
@@ -65,7 +65,7 @@
     #elif defined(ISO)
     default_layer {
         // ------------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   | DEL |
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   | DEL |
         // | TAB   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |        | INS |
         // | CAPS   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |  #  | ENTER | PGUP|
         // |SHIFT |  \  |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  SHIFT  | UP  | PGDN|
@@ -73,7 +73,7 @@
         // ------------------------------------------------------------------------------------------------
       bindings = <
 
-        &kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BKSP &kp DEL
+        &kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BSPC &kp DEL
         &kp TAB   &kp Q  &kp W  &kp E  &kp R  &kp T  &kp Y  &kp U  &kp  I    &kp  O  &kp  P   &kp LBKT &kp RBKT          &kp INS
         &kp CLCK   &kp A  &kp S  &kp D  &kp F  &kp G  &kp H  &kp J  &kp  K    &kp  L  &kp SEMI &kp SQT &kp NON_US_HASH &kp RET &kp PG_UP
         &kp LSHFT &kp NON_US_BSLH &kp Z  &kp X  &kp C  &kp V  &kp B  &kp N  &kp M  &kp COMMA &kp DOT &kp FSLH   &kp RSHFT   &kp UP &kp PG_DN
@@ -101,7 +101,7 @@
     #elif defined(ALL_1U)
     default_layer {
         // -------------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BKSP | DEL | HOME|
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BSPC | DEL | HOME|
         // | TAB    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    | END |
         // | CAPS    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER   | PGUP|
         // |SHIFT|NONE |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |SHIFT|NONE |  UP | PGDN|
@@ -136,7 +136,7 @@
     #elif defined(HHKB)
     default_layer {
         // ------------------------------------------------------------------------------------------------
-        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   | DEL |
+        // | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   | DEL |
         // | TAB   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    | HOME|
         // | CAPS   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    ENTER    | END |
         // |  SHIFT   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |      SHIFT      | PGUP|
@@ -144,7 +144,7 @@
         // ------------------------------------------------------------------------------------------------
       bindings = <
 
-        &kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BKSP &kp DEL
+        &kp ESC &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BSPC &kp DEL
         &kp TAB   &kp Q  &kp W  &kp E  &kp R  &kp T  &kp Y  &kp U  &kp  I    &kp  O  &kp  P   &kp LBKT &kp RBKT &kp BSLH &kp HOME
         &kp CLCK   &kp A  &kp S  &kp D  &kp F  &kp G  &kp H  &kp J  &kp  K    &kp  L  &kp SEMI &kp SQT         &kp RET &kp END
         &kp LSHFT     &kp Z  &kp X  &kp C  &kp V  &kp B  &kp N  &kp M  &kp COMMA &kp DOT &kp FSLH   &kp RSHFT   &kp PG_UP

app/boards/arm/ckp/bt75_v1.dts

@@ -13,7 +13,7 @@
   compatible = "polarityworks,bt75_v1";
 
   chosen {
-    zmk,matrix_transform = &ansi_transform;
+    zmk,matrix-transform = &ansi_transform;
   };
 
 

app/boards/arm/ckp/bt75_v1.keymap

@@ -11,11 +11,11 @@
 / {
   chosen {
   #ifdef ANSI
-    zmk,matrix_transform = &ansi_transform;
+    zmk,matrix-transform = &ansi_transform;
   #elif defined(ISO)
-    zmk,matrix_transform = &iso_transform;
+    zmk,matrix-transform = &iso_transform;
   #elif defined(ALL_1U)
-    zmk,matrix_transform = &all_1u_transform;
+    zmk,matrix-transform = &all_1u_transform;
   #else
   #error "Layout not defined, please define a layout using by uncommenting the appropriate line in bt75_v1.keymap"
   #endif
@@ -27,7 +27,7 @@
     default_layer {
         // ------------------------------------------------------------------------------------------------
         // | ESC | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F9  | F9  | F10 | F11 | F12 |PSCRN|HOME| END |
-        // |GRAVE|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   | DEL |
+        // |GRAVE|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   | DEL |
         // | TAB   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    | INS |
         // | CAPS   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    ENTER    | PGUP|
         // |  SHIFT   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |   SHIFT   | UP  | PGDN|
@@ -35,7 +35,7 @@
         // ------------------------------------------------------------------------------------------------
       bindings = <
         &kp ESC &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp  F8   &kp  F9 &kp  F10  &kp F11 &kp F12   &kp PSCRN &kp HOME &kp END
-        &kp GRAVE &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BKSP &kp DEL
+        &kp GRAVE &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BSPC &kp DEL
         &kp TAB   &kp Q  &kp W  &kp E  &kp R  &kp T  &kp Y  &kp U  &kp  I    &kp  O  &kp  P   &kp LBKT &kp RBKT &kp BSLH &kp INS
         &kp CLCK   &kp A  &kp S  &kp D  &kp F  &kp G  &kp H  &kp J  &kp  K    &kp  L  &kp SEMI &kp SQT         &kp RET &kp PG_UP
         &kp LSHFT     &kp Z  &kp X  &kp C  &kp V  &kp B  &kp N  &kp M  &kp COMMA &kp DOT &kp FSLH   &kp RSHFT   &kp UP &kp PG_DN
@@ -66,7 +66,7 @@
     default_layer {
         // ------------------------------------------------------------------------------------------------
         // | ESC | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F9  | F9  | F10 | F11 | F12 |PSCRN|HOME| END |
-        // |GRAVE|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   | DEL |
+        // |GRAVE|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   | DEL |
         // | TAB   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |        | INS |
         // | CAPS   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |  #  | ENTER | PGUP|
         // |SHIFT |  \  |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  SHIFT  | UP  | PGDN|
@@ -74,7 +74,7 @@
         // ------------------------------------------------------------------------------------------------
       bindings = <
         &kp ESC &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp  F8   &kp  F9 &kp  F10  &kp F11 &kp F12   &kp PSCRN &kp HOME &kp END
-        &kp GRAVE &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BKSP &kp DEL
+        &kp GRAVE &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &kp N6 &kp N7 &kp  N8   &kp  N9   &kp N0 &kp MINUS &kp EQUAL &kp BSPC &kp DEL
         &kp TAB   &kp Q  &kp W  &kp E  &kp R  &kp T  &kp Y  &kp U  &kp  I    &kp  O  &kp  P   &kp LBKT &kp RBKT          &kp INS
         &kp CLCK   &kp A  &kp S  &kp D  &kp F  &kp G  &kp H  &kp J  &kp  K    &kp  L  &kp SEMI &kp SQT &kp NON_US_HASH &kp RET &kp PG_UP
         &kp LSHFT &kp NON_US_BSLH &kp Z  &kp X  &kp C  &kp V  &kp B  &kp N  &kp M  &kp COMMA &kp DOT &kp FSLH   &kp RSHFT   &kp UP &kp PG_DN
@@ -105,7 +105,7 @@
     default_layer {
         // -------------------------------------------------------------------------------------------------
         // | ESC | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F9  | F9  | F10 | F11 | F12 |PSCRN| P_B | INS |
-        // |GRAVE|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BKSP | DEL | HOME|
+        // |GRAVE|  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |BSPC | DEL | HOME|
         // | TAB    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    | END |
         // | CAPS    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER   | PGUP|
         // |SHIFT|NONE |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |SHIFT|NONE |  UP | PGDN|

app/boards/arm/ckp/ckp.dtsi

@@ -34,7 +34,8 @@
 
     kscan0: kscan_0 {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
+
         diode-direction = "col2row";
 
         col-gpios
@@ -66,15 +67,14 @@
             ;
     };
 
-    ext-power {
+    // Node name must match original "EXT_POWER" label to preserve user settings.
+    EXT_POWER {
         compatible = "zmk,ext-power-generic";
-        label = "EXT_POWER";
         control-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
     };
 
     encoder_1: encoder_1 {
         compatible = "alps,ec11";
-        label = "ENCODER_ONE";
         a-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpio0 19 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -83,7 +83,6 @@
 
     encoder_2: encoder_2 {
         compatible = "alps,ec11";
-        label = "ENCODER_TWO";
         a-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -92,7 +91,6 @@
 
     encoder_3: encoder_3 {
         compatible = "alps,ec11";
-        label = "encoder_3";
         a-gpios = <&gpio0 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         b-gpios = <&gpio0 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
         steps = <80>;
@@ -101,7 +99,6 @@
 
     backlight: pwmleds {
         compatible = "pwm-leds";
-        label = "Backlight LEDs";
         pwm_led_0 {
             pwms = <&pwm0 0 10000 PWM_POLARITY_NORMAL>;
         };
@@ -111,13 +108,11 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "VBATT";
         io-channels = <&adc 2>;
         output-ohms = <100000>;
         full-ohms = <(100000 + 100000)>;
@@ -147,7 +142,7 @@
     status = "okay";
 };
 
-&usbd {
+zephyr_udc0: &usbd {
     status = "okay";
 };
 
@@ -163,11 +158,9 @@
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "softdevice";
             reg = <0x00000000 0x00026000>;
         };
         code_partition: partition@26000 {
-            label = "code_partition";
             reg = <0x00026000 0x000c6000>;
         };
 
@@ -181,12 +174,10 @@
          * if enabled.
          */
         storage_partition: partition@ec000 {
-            label = "storage";
             reg = <0x000ec000 0x00008000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };
@@ -201,7 +192,6 @@
 
     led_strip: ws2812@0 {
         compatible = "worldsemi,ws2812-spi";
-        label = "WS2812";
 
         /* SPI */
         reg = <0>;

app/boards/arm/ckp/pre_dt_board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2024 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+# Suppresses duplicate unit-address warning at build time for power, clock, acl and flash-controller
+# https://docs.zephyrproject.org/latest/build/dts/intro-input-output.html
+
+list(APPEND EXTRA_DTC_FLAGS "-Wno-unique_unit_address_if_enabled")

app/boards/arm/corneish_zen/Kconfig.defconfig

@@ -57,6 +57,13 @@ config IL0323
 config ZMK_DISPLAY_BLANK_ON_IDLE
     default n
 
+# Needed for the IL0323 driver which allocs memory to clear the display
+config HEAP_MEM_POOL_SIZE
+    default 1024
+
+ config LV_Z_MEM_POOL_SIZE
+     default 4096
+
 endif # ZMK_DISPLAY
 
 menuconfig CUSTOM_WIDGET_BATTERY_STATUS

app/boards/arm/corneish_zen/board.cmake

@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: MIT
 
 board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
-include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/corneish_zen/corneish_zen.dtsi

@@ -20,8 +20,7 @@
         zephyr,flash = &flash0;
         zmk,kscan = &kscan0;
         zmk,display = &epd;
-        zephyr,console = &cdc_acm_uart;
-        zmk,matrix_transform = &default_transform;
+        zmk,matrix-transform = &default_transform;
     };
 
     default_transform: keymap_transform_0 {
@@ -76,12 +75,8 @@
     status = "okay";
 };
 
-&usbd {
+zephyr_udc0: &usbd {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
 };
 
 &flash0 {
@@ -95,11 +90,9 @@
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "softdevice";
             reg = <0x00000000 0x00026000>;
         };
         code_partition: partition@26000 {
-            label = "code_partition";
             reg = <0x00026000 0x000c6000>;
         };
 
@@ -113,12 +106,10 @@
          * if enabled.
          */
         storage_partition: partition@ec000 {
-            label = "storage";
             reg = <0x000ec000 0x00008000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };

app/boards/arm/corneish_zen/corneish_zen.keymap

@@ -11,8 +11,8 @@
 
 / {
     chosen {
-        zmk,matrix_transform = &default_transform;
-        // zmk,matrix_transform = &five_column_transform;
+        zmk,matrix-transform = &default_transform;
+        // zmk,matrix-transform = &five_column_transform;
     };
 };
 
@@ -21,9 +21,9 @@
         compatible = "zmk,keymap";
 
         default_layer {
-            label = "QWERTY";
+            display-name = "QWERTY";
 // --------------------------------------------------------------------------------
-// |  TAB |  Q  |  W  |  E  |  R  |  T  |   |  Y  |  U   |  I  |  O  |  P  | BKSP |
+// |  TAB |  Q  |  W  |  E  |  R  |  T  |   |  Y  |  U   |  I  |  O  |  P  | BSPC |
 // | CTRL |  A  |  S  |  D  |  F  |  G  |   |  H  |  J   |  K  |  L  |  ;  |  '   |
 // | SHFT |  Z  |  X  |  C  |  V  |  B  |   |  N  |  M   |  ,  |  .  |  /  | ESC  |
 //                    | GUI | LWR | SPC |   | ENT | RSE  | ALT |
@@ -36,9 +36,9 @@
         };
 
         lower_layer {
-            label = "NUMBER";
+            display-name = "NUMBER";
 // -----------------------------------------------------------------------------------------
-// |  TAB |  1  |  2  |  3  |  4  |  5  |   |  6  |  7  |  8  |  9  |  0  | BKSP |
+// |  TAB |  1  |  2  |  3  |  4  |  5  |   |  6  |  7  |  8  |  9  |  0  | BSPC |
 // | BTCLR| BT1 | BT2 | BT3 | BT4 | BT5 |   | LFT | DWN |  UP | RGT |     |      |
 // | SHFT |     |     |     |     |     |   |     |     |     |     |     |      |
 //                    | GUI |     | SPC |   | ENT |     | ALT |
@@ -51,16 +51,16 @@
         };
 
         raise_layer {
-            label = "SYMBOL";
+            display-name = "SYMBOL";
 // -----------------------------------------------------------------------------------------
-// |  TAB |  !  |  @  |  #  |  $  |  %  |   |  ^  |  &  |  *  |  (  |  )  | BKSP |
+// |  TAB |  !  |  @  |  #  |  $  |  %  |   |  ^  |  &  |  *  |  (  |  )  | BSPC |
 // | CTRL |     |     |     |     |     |   |  -  |  =  |  [  |  ]  |  \  |  `   |
 // | SHFT |     |     |     |     |     |   |  _  |  +  |  {  |  }  | "|" |  ~   |
 //                    | GUI |     | SPC |   | ENT |     | ALT |
             bindings = <
-&kp  TAB  &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT   &kp CARET &kp AMPS  &kp KP_MULTIPLY &kp LPAR &kp RPAR &kp BSPC
-&kp LCTRL &trans   &trans &trans   &trans   &trans      &kp MINUS &kp EQUAL &kp LBKT        &kp RBKT &kp BSLH &kp GRAVE
-&kp LSHFT &trans   &trans &trans   &trans   &trans      &kp UNDER &kp PLUS  &kp LBRC        &kp RBRC &kp PIPE &kp TILDE
+&kp  TAB  &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT   &kp CARET &kp AMPS  &kp ASTRK &kp LPAR &kp RPAR &kp BSPC
+&kp LCTRL &trans   &trans &trans   &trans   &trans      &kp MINUS &kp EQUAL &kp LBKT  &kp RBKT &kp BSLH &kp GRAVE
+&kp LSHFT &trans   &trans &trans   &trans   &trans      &kp UNDER &kp PLUS  &kp LBRC  &kp RBRC &kp PIPE &kp TILDE
                           &kp LGUI &trans   &kp SPACE   &kp RET   &trans    &kp RALT
             >;
         };

app/boards/arm/corneish_zen/corneish_zen_v1_left.dts

@@ -15,7 +15,7 @@
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
 
         diode-direction = "col2row";
         row-gpios
@@ -39,7 +39,6 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 };
@@ -88,9 +87,8 @@
 
     fuelgauge: bq274xx@55 {
         compatible = "ti,bq274xx";
-        label = "BATTERY";
         reg = <0x55>;
-        design-voltage = <3700>; //Battery Design Volatge in mV
+        design-voltage = <3700>; //Battery Design Voltage in mV
         design-capacity = <180>; //Battery Design Capacity in mAh
         taper-current = <2>; //Battery Taper current in mAh
         terminate-voltage = <2750>; //Battery Terminate Voltage in mV
@@ -109,7 +107,6 @@
     epd: il0323@0 {
         compatible = "gooddisplay,il0323";
         reg =  <0>;
-        label = "DISPLAY";
         width = <80>;
         height = <128>;
         spi-max-frequency = <4000000>;

app/boards/arm/corneish_zen/corneish_zen_v1_left_defconfig

@@ -44,7 +44,7 @@ CONFIG_ZMK_BLE=y
 
 # enable display drivers
 CONFIG_ZMK_DISPLAY_WORK_QUEUE_DEDICATED=y
-CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=2048
+CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=4096
 CONFIG_LV_Z_BITS_PER_PIXEL=1
 CONFIG_LV_COLOR_DEPTH_1=y
 CONFIG_LV_DPI_DEF=145

app/boards/arm/corneish_zen/corneish_zen_v1_right.dts

@@ -15,7 +15,7 @@
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
 
         diode-direction = "col2row";
         row-gpios
@@ -39,7 +39,6 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 };
@@ -96,9 +95,8 @@
 
     fuelgauge: bq274xx@55 {
         compatible = "ti,bq274xx";
-        label = "BATTERY";
         reg = <0x55>;
-        design-voltage = <3700>; //Battery Design Volatge in mV
+        design-voltage = <3700>; //Battery Design Voltage in mV
         design-capacity = <180>; //Battery Design Capacity in mAh
         taper-current = <2>; //Battery Taper current in mAh 2.1
         terminate-voltage = <2750>; //Battery Terminate Voltage in mV
@@ -117,7 +115,6 @@
     epd: il0323@0 {
         compatible = "gooddisplay,il0323";
         reg =  <0>;
-        label = "DISPLAY";
         width = <80>;
         height = <128>;
         spi-max-frequency = <4000000>;

app/boards/arm/corneish_zen/corneish_zen_v1_right_defconfig

@@ -39,12 +39,12 @@ CONFIG_FLASH_MAP=y
 CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
 CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM=y
 
-CONFIG_ZMK_USB=y
+CONFIG_ZMK_USB=n
 CONFIG_ZMK_BLE=y
 
 # enable display drivers
 CONFIG_ZMK_DISPLAY_WORK_QUEUE_DEDICATED=y
-CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=2048
+CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=4096
 CONFIG_LV_Z_BITS_PER_PIXEL=1
 CONFIG_LV_COLOR_DEPTH_1=y
 CONFIG_LV_DPI_DEF=145

app/boards/arm/corneish_zen/corneish_zen_v2_left.dts

@@ -15,7 +15,7 @@
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
 
         diode-direction = "col2row";
         row-gpios
@@ -39,13 +39,11 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "BATTERY";
         io-channels = <&adc 0>;
         output-ohms = <1960000>;
         full-ohms = <(1960000 + 810000)>;
@@ -83,7 +81,6 @@
     epd: il0323@0 {
         compatible = "gooddisplay,il0323";
         reg =  <0>;
-        label = "DISPLAY";
         width = <80>;
         height = <128>;
         spi-max-frequency = <4000000>;

app/boards/arm/corneish_zen/corneish_zen_v2_left_defconfig

@@ -40,7 +40,7 @@ CONFIG_ZMK_BLE=y
 
 # enable display drivers
 CONFIG_ZMK_DISPLAY_WORK_QUEUE_DEDICATED=y
-CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=2048
+CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=4096
 CONFIG_LV_Z_BITS_PER_PIXEL=1
 CONFIG_LV_COLOR_DEPTH_1=y
 CONFIG_LV_DPI_DEF=145

app/boards/arm/corneish_zen/corneish_zen_v2_right.dts

@@ -15,7 +15,7 @@
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
 
         diode-direction = "col2row";
         row-gpios
@@ -39,13 +39,11 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "BATTERY";
         io-channels = <&adc 0>;
         output-ohms = <1960000>;
         full-ohms = <(1960000 + 810000)>;
@@ -90,7 +88,6 @@
     epd: il0323@0 {
         compatible = "gooddisplay,il0323";
         reg =  <0>;
-        label = "DISPLAY";
         width = <80>;
         height = <128>;
         spi-max-frequency = <4000000>;

app/boards/arm/corneish_zen/corneish_zen_v2_right_defconfig

@@ -35,12 +35,12 @@ CONFIG_FLASH_MAP=y
 CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
 CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM=y
 
-CONFIG_ZMK_USB=y
+CONFIG_ZMK_USB=n
 CONFIG_ZMK_BLE=y
 
 # enable display drivers
 CONFIG_ZMK_DISPLAY_WORK_QUEUE_DEDICATED=y
-CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=2048
+CONFIG_ZMK_DISPLAY_DEDICATED_THREAD_STACK_SIZE=4096
 CONFIG_LV_Z_BITS_PER_PIXEL=1
 CONFIG_LV_COLOR_DEPTH_1=y
 CONFIG_LV_DPI_DEF=145

app/boards/arm/corneish_zen/pre_dt_board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2024 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+# Suppresses duplicate unit-address warning at build time for power, clock, acl and flash-controller
+# https://docs.zephyrproject.org/latest/build/dts/intro-input-output.html
+
+list(APPEND EXTRA_DTC_FLAGS "-Wno-unique_unit_address_if_enabled")

app/boards/arm/corneish_zen/widgets/battery_status.c

@@ -6,12 +6,12 @@
  */
 
 #include <zephyr/kernel.h>
-#include <zephyr/bluetooth/services/bas.h>
 
 #include <zephyr/logging/log.h>
 LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);
 
 #include <zmk/display.h>
+#include <zmk/battery.h>
 #include "battery_status.h"
 #include <zmk/usb.h>
 #include <zmk/events/usb_conn_state_changed.h>
@@ -66,8 +66,10 @@ void battery_status_update_cb(struct battery_status_state state) {
 }
 
 static struct battery_status_state battery_status_get_state(const zmk_event_t *eh) {
+    const struct zmk_battery_state_changed *ev = as_zmk_battery_state_changed(eh);
+
     return (struct battery_status_state) {
-        .level = bt_bas_get_battery_level(),
+        .level = (ev != NULL) ? ev->state_of_charge : zmk_battery_state_of_charge(),
 #if IS_ENABLED(CONFIG_USB_DEVICE_STACK)
         .usb_present = zmk_usb_is_powered(),
 #endif /* IS_ENABLED(CONFIG_USB_DEVICE_STACK) */

app/boards/arm/corneish_zen/widgets/layer_status.c

@@ -45,7 +45,7 @@ static void layer_status_update_cb(struct layer_status_state state) {
 
 static struct layer_status_state layer_status_get_state(const zmk_event_t *eh) {
     uint8_t index = zmk_keymap_highest_layer_active();
-    return (struct layer_status_state){.index = index, .label = zmk_keymap_layer_label(index)};
+    return (struct layer_status_state){.index = index, .label = zmk_keymap_layer_name(index)};
 }
 
 ZMK_DISPLAY_WIDGET_LISTENER(widget_layer_status, struct layer_status_state, layer_status_update_cb,

app/boards/arm/corneish_zen/widgets/peripheral_status.c

@@ -6,7 +6,6 @@
  */
 
 #include <zephyr/kernel.h>
-#include <zephyr/bluetooth/services/bas.h>
 
 #include <zephyr/logging/log.h>
 LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL);

app/boards/arm/dz60rgb/dz60rgb_rev1.dts

@@ -16,9 +16,8 @@
     chosen {
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
         zmk,kscan = &kscan0;
-        zmk,matrix_transform = &default_transform;
+        zmk,matrix-transform = &default_transform;
     };
 
     default_transform: keymap_transform_0 {
@@ -36,7 +35,6 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                     RC(
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
 
         diode-direction = "col2row";
         row-gpios
@@ -66,12 +64,8 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                     RC(
 
 };
 
-&usb {
+zephyr_udc0: &usb {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
 };
 
 &flash0 {
@@ -86,7 +80,6 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                     RC(
 
         /* Set 6Kb of storage at the end of the 256Kb of flash */
         storage_partition: partition@3e800 {
-            label = "storage";
             reg = <0x0003e800 0x00001800>;
         };
     };

app/boards/arm/dz60rgb/dz60rgb_rev1.keymap

@@ -7,7 +7,7 @@
 
         default_layer {
 // ------------------------------------------------------------------------------------------
-// | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
+// | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   |
 // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   "|"   |
 // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
 // |  SHIFT  |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  SHIFT(/)  |  ^  | DEL |

app/boards/arm/dz60rgb/dz60rgb_rev1_defconfig

@@ -5,9 +5,6 @@ CONFIG_SOC_STM32F303XC=y
 # 72MHz system clock
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000
 
-# enable pinmux
-CONFIG_PINMUX=y
-
 # enable GPIO
 CONFIG_GPIO=y
 

app/boards/arm/ferris/ferris_rev02.dts

@@ -10,6 +10,12 @@
 
 #include <dt-bindings/zmk/matrix_transform.h>
 
+#include <layouts/cuddlykeyboards/ferris.dtsi>
+
+&cuddlykeyboards_ferris_layout {
+    transform = <&transform>;
+};
+
 / {
     model = "Ferris rev0.2";
     compatible = "ferris,rev02", "st,stm32f072";
@@ -17,9 +23,7 @@
     chosen {
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
         zmk,kscan = &kscan;
-        zmk,matrix_transform = &transform;
         /* TODO: Enable once we support the IC for underglow
         zmk,underglow = &led_strip;
          */
@@ -40,7 +44,6 @@
 
     kscan: kscan {
         compatible = "zmk,kscan-composite";
-        label = "KSCAN";
         rows = <4>;
         columns = <10>;
 
@@ -56,7 +59,6 @@
 
     kscan_left: kscan_left {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN_LEFT";
 
         diode-direction = "col2row";
 
@@ -77,7 +79,6 @@
 
     kscan_right: kscan_right {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN_RIGHT";
 
         diode-direction = "row2col";
 
@@ -113,18 +114,24 @@
     };
 };
 
-&usb {
+zephyr_udc0: &usb {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
+
+    pinctrl-0 = <&usb_dm_pa11 &usb_dp_pa12>;
+    pinctrl-names = "default";
+
+    // Overridden to lower RAM usage.
+    num-bidir-endpoints = <4>;
 };
 
 &clk_hsi {
     status = "okay";
 };
 
+&clk_hsi48 {
+    status = "okay";
+};
+
 &pll {
     prediv = <1>;
     mul = <6>;
@@ -156,7 +163,6 @@
 
         /* Set 6Kb of storage at the end of the 128Kb of flash */
         storage_partition: partition@3e800 {
-            label = "storage";
             reg = <0x0001e800 0x00001800>;
         };
     };

app/boards/arm/ferris/ferris_rev02.keymap

@@ -4,6 +4,8 @@
  * SPDX-License-Identifier: MIT
  */
 
+#undef ZMK_BEHAVIORS_KEEP_ALL
+
 #include <behaviors.dtsi>
 #include <dt-bindings/zmk/keys.h>
 #include <dt-bindings/zmk/bt.h>
@@ -14,15 +16,14 @@
 #define SYM_L 4
 
 // Using layer taps on thumbs, having quick tap as well helps w/ repeating space/backspace
-&lt { quick_tap_ms = <200>; };
+&lt { quick-tap-ms = <200>; };
 
 / {
     behaviors {
         hm: homerow_mods {
             compatible = "zmk,behavior-hold-tap";
-            label = "homerow mods";
             #binding-cells = <2>;
-            tapping_term_ms = <200>;
+            tapping-term-ms = <200>;
             flavor = "tap-preferred";
             bindings = <&kp>, <&kp>;
         };
@@ -34,16 +35,16 @@
         default_layer {
             bindings = <
                 &kp Q      &kp W      &kp E       &kp R          &kp T         &kp Y            &kp U          &kp I       &kp O      &kp P
-                &hm LGUI A &hm LALT S &hm LCTRL D &hm LSHFT F    &kp G         &kp H            &hm RSHFT J    &hm RCTRL K &hm LALT L &hm LGUI QUOT
+                &hm LGUI A &hm LALT S &hm LCTRL D &hm LSHFT F    &kp G         &kp H            &hm RSHFT J    &hm RCTRL K &hm LALT L &hm LGUI SQT
                 &kp Z      &kp X      &kp C       &kp V          &kp B         &kp N            &kp M          &kp COMMA   &kp DOT    &kp FSLH
-                                                  &lt NAV_L TAB  &kp ENTER     &lt NUM_L SPACE  &lt SYM_L BKSP
+                                                  &lt NAV_L TAB  &kp ENTER     &lt NUM_L SPACE  &lt SYM_L BSPC
             >;
         };
 
         nav_layer {
             bindings = <
                 &trans     &trans     &trans      &trans          &trans       &trans           &trans         &trans      &trans     &trans
-                &trans     &trans     &trans      &trans          &trans       &trans           &kp LARW       &kp DARW    &kp UARW   &kp RARW
+                &trans     &trans     &trans      &trans          &trans       &trans           &kp LEFT       &kp DOWN    &kp UP   &kp RIGHT
                 &trans     &trans     &trans      &trans          &trans       &trans           &kp HOME       &kp PG_DN   &kp PG_UP  &kp END
                                                   &trans          &trans       &kp ESC          &kp DEL
             >;

app/boards/arm/ferris/ferris_rev02_defconfig

@@ -6,7 +6,7 @@ CONFIG_SOC_STM32F072XB=y
 # 48MHz system clock
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
 
-# enable PINMUX
+# enable PINCTRL
 CONFIG_PINCTRL=y
 
 # enable GPIO

app/boards/arm/glove80/board.cmake

@@ -2,5 +2,5 @@
 # SPDX-License-Identifier: MIT
 
 board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
-include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/glove80/glove80.dtsi

@@ -11,11 +11,10 @@
 / {
     chosen {
         zmk,kscan = &kscan0;
-        zmk,matrix_transform = &default_transform;
+        zmk,matrix-transform = &default_transform;
         zephyr,code-partition = &code_partition;
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
     };
 
     default_transform: keymap_transform_0 {
@@ -34,7 +33,8 @@
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
+
         diode-direction = "col2row";
         debounce-press-ms = <4>;
         debounce-release-ms = <20>;
@@ -58,12 +58,8 @@
     status = "okay";
 };
 
-&usbd {
+zephyr_udc0: &usbd {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
 };
 
 &flash0 {
@@ -77,11 +73,9 @@
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "softdevice";
             reg = <0x00000000 0x00026000>;
         };
         code_partition: partition@26000 {
-            label = "code_partition";
             reg = <0x00026000 0x000c6000>;
         };
 
@@ -95,12 +89,10 @@
          * if enabled.
          */
         storage_partition: partition@ec000 {
-            label = "storage";
             reg = <0x000ec000 0x00008000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };

app/boards/arm/glove80/glove80.keymap

@@ -22,7 +22,6 @@
         // Configure it as a tap dance, so the first tap (or hold) is a &mo and the second tap is a &to
         layer_td: tap_dance_0 {
             compatible = "zmk,behavior-tap-dance";
-            label = "LAYER_TAP_DANCE";
             #binding-cells = <0>;
             tapping-term-ms = <200>;
             bindings = <&mo LOWER>, <&to LOWER>;
@@ -31,7 +30,6 @@
 
     macros {
         bt_0: bt_profile_macro_0 {
-            label = "BT_0";
             compatible = "zmk,behavior-macro";
             #binding-cells = <0>;
             bindings
@@ -40,7 +38,6 @@
         };
 
         bt_1: bt_profile_macro_1 {
-            label = "BT_1";
             compatible = "zmk,behavior-macro";
             #binding-cells = <0>;
             bindings
@@ -49,7 +46,6 @@
         };
 
         bt_2: bt_profile_macro_2 {
-            label = "BT_2";
             compatible = "zmk,behavior-macro";
             #binding-cells = <0>;
             bindings
@@ -58,7 +54,6 @@
         };
 
         bt_3: bt_profile_macro_3 {
-            label = "BT_3";
             compatible = "zmk,behavior-macro";
             #binding-cells = <0>;
             bindings

app/boards/arm/glove80/glove80_lh.dts

@@ -21,23 +21,20 @@
 
     back_led_backlight: pwmleds {
         compatible = "pwm-leds";
-        label = "BACK LED";
         pwm_led_0 {
             pwms = <&pwm0 0 PWM_USEC(20) PWM_POLARITY_NORMAL>;
-            label = "Back LED configured as backlight";
         };
     };
 
-    ext-power {
+    // Node name must match original "EXT_POWER" label to preserve user settings.
+    EXT_POWER {
         compatible = "zmk,ext-power-generic";
-        label = "EXT_POWER";
         control-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; /* WS2812_CE */
         init-delay-ms = <100>;
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-nrf-vddh";
-        label = "BATTERY";
     };
 };
 
@@ -51,7 +48,6 @@
 
     led_strip: ws2812@0 {
         compatible = "worldsemi,ws2812-spi";
-        label = "WS2812C-2020";
 
         /* SPI */
         reg = <0>; /* ignored, but necessary for SPI bindings */

app/boards/arm/glove80/glove80_rh.dts

@@ -22,23 +22,20 @@
 
     back_led_backlight: pwmleds {
         compatible = "pwm-leds";
-        label = "BACK LED";
         pwm_led_0 {
             pwms = <&pwm0 0 PWM_USEC(20) PWM_POLARITY_NORMAL>;
-            label = "Back LED configured as backlight";
         };
     };
 
-    ext-power {
+    // Node name must match original "EXT_POWER" label to preserve user settings.
+    EXT_POWER {
         compatible = "zmk,ext-power-generic";
-        label = "EXT_POWER";
         control-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; /* WS2812_CE */
         init-delay-ms = <100>;
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-nrf-vddh";
-        label = "BATTERY";
     };
 };
 
@@ -52,7 +49,6 @@
 
     led_strip: ws2812@0 {
         compatible = "worldsemi,ws2812-spi";
-        label = "WS2812C-2020";
 
         /* SPI */
         reg = <0>; /* ignored, but necessary for SPI bindings */

app/boards/arm/glove80/pre_dt_board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2024 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+# Suppresses duplicate unit-address warning at build time for power, clock, acl and flash-controller
+# https://docs.zephyrproject.org/latest/build/dts/intro-input-output.html
+
+list(APPEND EXTRA_DTC_FLAGS "-Wno-unique_unit_address_if_enabled")

app/boards/arm/kbdfans_tofu65/kbdfans_tofu65_v2.dts

@@ -13,11 +13,9 @@
     chosen {
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
-        zephyr,shell-uart = &cdc_acm_uart;
         zephyr,code-partition = &code_partition;
         zmk,kscan = &kscan0;
-        zmk,matrix_transform = &default_transform;
+        zmk,matrix-transform = &default_transform;
     };
 
     xtal_clk: xtal-clk {
@@ -53,7 +51,6 @@ RC(4,0) RC(4,1) RC(4,2)                         RC(4,6)         RC(4,8) RC(4,9)
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
 
         diode-direction = "col2row";
         row-gpios
@@ -93,7 +90,6 @@ RC(4,0) RC(4,1) RC(4,2)                         RC(4,6)         RC(4,8) RC(4,9)
 
         /* Reserved memory for the second stage bootloader */
         second_stage_bootloader: partition@0 {
-            label = "second_stage_bootloader";
             reg = <0x00000000 0x100>;
             read-only;
         };
@@ -103,7 +99,6 @@ RC(4,0) RC(4,1) RC(4,2)                         RC(4,6)         RC(4,8) RC(4,9)
          * size is 16MB minus the 0x100 bytes taken by the bootloader.
          */
         code_partition: partition@100 {
-            label = "code";
             reg = <0x100 (DT_SIZE_M(16) - 0x100)>;
             read-only;
         };
@@ -111,11 +106,8 @@ RC(4,0) RC(4,1) RC(4,2)                         RC(4,6)         RC(4,8) RC(4,9)
 };
 
 
-&usbd {
+zephyr_udc0: &usbd {
   status = "okay";
-  cdc_acm_uart: cdc_acm_uart {
-    compatible = "zephyr,cdc-acm-uart";
-  };
 };
 
 

app/boards/arm/mikoto/CMakeLists.txt

@@ -1,6 +1,3 @@
-
-if(CONFIG_PINMUX)
 zephyr_library()
 zephyr_library_sources(pinmux.c)
-zephyr_library_include_directories(${ZEPHYR_BASE}/drivers)
-endif()
+zephyr_library_include_directories(${ZEPHYR_BASE}/drivers)

app/boards/arm/mikoto/Kconfig

@@ -4,6 +4,12 @@ config BOARD_ENABLE_DCDC
     default y
     depends on (BOARD_MIKOTO_520)
 
+config BOARD_ENABLE_DCDC_HV
+    bool "High voltage DCDC converter"
+    select SOC_DCDC_NRF52X_HV
+    default y
+    depends on (BOARD_MIKOTO_520)
+
 choice BOARD_MIKOTO_CHARGER_CURRENT
     prompt "Charge current to supply to attached batteries"
     depends on (BOARD_MIKOTO_520)

app/boards/arm/mikoto/Kconfig.defconfig

@@ -21,9 +21,6 @@ endif # USB
 config BT_CTLR
     default BT
 
-config PINMUX
-    default y
-
 choice BOARD_MIKOTO_CHARGER_CURRENT
     default BOARD_MIKOTO_CHARGER_CURRENT_100MA
 endchoice

app/boards/arm/mikoto/arduino_pro_micro_pins.dtsi

@@ -55,5 +55,5 @@
 
 pro_micro_d: &pro_micro {};
 pro_micro_i2c: &i2c0 {};
-pro_micro_spi: &spi0 {};
+pro_micro_spi: &spi1 {};
 pro_micro_serial: &uart0 {};

app/boards/arm/mikoto/board.cmake

@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: MIT
 
 board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
-include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)

app/boards/arm/mikoto/mikoto_520-pinctrl.dtsi

@@ -36,4 +36,21 @@
             low-power-enable;
         };
     };
+
+    spi1_default: spi1_default {
+        group1 {
+            psels = <NRF_PSEL(SPIM_SCK, 0, 2)>,
+                <NRF_PSEL(SPIM_MOSI, 0, 10)>,
+                <NRF_PSEL(SPIM_MISO, 1, 13)>;
+        };
+    };
+
+    spi1_sleep: spi1_sleep {
+        group1 {
+            psels = <NRF_PSEL(SPIM_SCK, 0, 2)>,
+                <NRF_PSEL(SPIM_MOSI, 0, 10)>,
+                <NRF_PSEL(SPIM_MISO, 1, 13)>;
+            low-power-enable;
+        };
+    };
 };

app/boards/arm/mikoto/mikoto_520.dts

@@ -17,7 +17,6 @@
         zephyr,code-partition = &code_partition;
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
         zmk,battery = &vbatt;
     };
 
@@ -25,20 +24,18 @@
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
-    ext-power {
+    // Node name must match original "EXT_POWER" label to preserve user settings.
+    EXT_POWER {
         compatible = "zmk,ext-power-generic";
-        label = "EXT_POWER";
         control-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
         init-delay-ms = <50>;
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "BATTERY";
         io-channels = <&adc 1>;
         output-ohms = <10000000>;
         full-ohms = <(10000000 + 4000000)>;
@@ -68,6 +65,13 @@
     pinctrl-names = "default", "sleep";
 };
 
+&spi1 {
+    compatible = "nordic,nrf-spim";
+    pinctrl-0 = <&spi1_default>;
+    pinctrl-1 = <&spi1_sleep>;
+    pinctrl-names = "default", "sleep";
+};
+
 &uart0 {
     compatible = "nordic,nrf-uarte";
     current-speed = <115200>;
@@ -76,12 +80,8 @@
     pinctrl-names = "default", "sleep";
 };
 
-&usbd {
+zephyr_udc0: &usbd {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
 };
 
 
@@ -96,11 +96,9 @@
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "softdevice";
             reg = <0x00000000 0x00026000>;
         };
         code_partition: partition@26000 {
-            label = "code_partition";
             reg = <0x00026000 0x000c6000>;
         };
 
@@ -114,12 +112,10 @@
          * if enabled.
          */
         storage_partition: partition@ec000 {
-            label = "storage";
             reg = <0x000ec000 0x00008000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };

app/boards/arm/mikoto/pinmux.c

@@ -11,8 +11,7 @@
 #include <zephyr/sys/sys_io.h>
 #include <zephyr/devicetree.h>
 
-static int pinmux_mikoto_init(const struct device *port) {
-    ARG_UNUSED(port);
+static int pinmux_mikoto_init(void) {
 
 #if CONFIG_BOARD_MIKOTO_520
     const struct device *p0 = DEVICE_DT_GET(DT_NODELABEL(gpio0));

app/boards/arm/mikoto/pre_dt_board.cmake

@@ -0,0 +1,9 @@
+#
+# Copyright (c) 2024 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+# Suppresses duplicate unit-address warning at build time for power, clock, acl and flash-controller
+# https://docs.zephyrproject.org/latest/build/dts/intro-input-output.html
+
+list(APPEND EXTRA_DTC_FLAGS "-Wno-unique_unit_address_if_enabled")

app/boards/arm/nice60/board.cmake

@@ -3,5 +3,6 @@
 
 set(OPENOCD_NRF5_SUBFAMILY nrf52)
 board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset")
+include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)
 include(${ZEPHYR_BASE}/boards/common/openocd-nrf5.board.cmake)

app/boards/arm/nice60/nice60-pinctrl.dtsi

@@ -9,4 +9,11 @@
             psels = <NRF_PSEL(SPIM_MOSI, 0, 27)>;
         };
     };
+
+    spi3_sleep: spi3_sleep {
+        group1 {
+            psels = <NRF_PSEL(SPIM_MOSI, 0, 27)>;
+            low-power-enable;
+        };
+    };
 };

app/boards/arm/nice60/nice60.dts

@@ -20,10 +20,9 @@
         zephyr,code-partition = &code_partition;
         zephyr,sram = &sram0;
         zephyr,flash = &flash0;
-        zephyr,console = &cdc_acm_uart;
         zmk,battery = &vbatt;
         zmk,kscan = &kscan0;
-        zmk,matrix_transform = &default_transform;
+        zmk,matrix-transform = &default_transform;
         zmk,underglow = &led_strip;
     };
 
@@ -42,7 +41,7 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                       R
 
     kscan0: kscan {
         compatible = "zmk,kscan-gpio-matrix";
-        label = "KSCAN";
+        wakeup-source;
 
         diode-direction = "col2row";
         row-gpios
@@ -74,19 +73,17 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                       R
         compatible = "gpio-leds";
         blue_led: led_0 {
             gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-            label = "Blue LED";
         };
     };
 
-    ext-power {
+    // Node name must match original "EXT_POWER" label to preserve user settings.
+    EXT_POWER {
         compatible = "zmk,ext-power-generic";
-        label = "EXT_POWER";
         control-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
     };
 
     vbatt: vbatt {
         compatible = "zmk,battery-voltage-divider";
-        label = "BATTERY";
         io-channels = <&adc 2>;
         output-ohms = <2000000>;
         full-ohms = <(2000000 + 806000)>;
@@ -113,12 +110,12 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                       R
     compatible = "nordic,nrf-spim";
 
     pinctrl-0 = <&spi3_default>;
-    pinctrl-names = "default";
+    pinctrl-1 = <&spi3_sleep>;
+    pinctrl-names = "default", "sleep";
     status = "okay";
 
     led_strip: ws2812@0 {
         compatible = "worldsemi,ws2812-spi";
-        label = "WS2812";
 
         /* SPI */
         reg = <0>; /* ignored, but necessary for SPI bindings */
@@ -132,12 +129,8 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                       R
     };
 };
 
-&usbd {
+zephyr_udc0: &usbd {
     status = "okay";
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
 };
 
 &flash0 {
@@ -151,12 +144,10 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                       R
         #size-cells = <1>;
 
         sd_partition: partition@0 {
-            label = "mbr";
             reg = <0x00000000 0x00001000>;
         };
 
         code_partition: partition@1000 {
-            label = "code_partition";
             reg = <0x00001000 0x000d3000>;
         };
 
@@ -170,12 +161,10 @@ RC(4,0)   RC(4,1)   RC(4,2)                      RC(4,5)                       R
          * if enabled.
          */
         storage_partition: partition@d4000 {
-            label = "storage";
             reg = <0x000d4000 0x00020000>;
         };
 
         boot_partition: partition@f4000 {
-            label = "adafruit_boot";
             reg = <0x000f4000 0x0000c000>;
         };
     };

app/boards/arm/nice60/nice60.keymap

@@ -15,7 +15,7 @@
 
         default_layer {
 // ------------------------------------------------------------------------------------------
-// | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BKSP   |
+// | ESC |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   BSPC   |
 // | TAB  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   "|"   |
 // | CAPS  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |     ENTER    |
 // |  SHIFT  |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |      SHIFT       |