* Add blackbill interconnect metadata.
* Add config/overlay for upstream blackpill boards to work with ZMK.
* Add pillbug board.
* Updated new shield docs.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Adds support for the CKP family of boards
BT60V2 ANSIHotswap, ISO Hotswap, ANSI Lowpro and soldered
BT65 ANSI Hotswap, ISO Hotswap and soldered
BT75 ANSI Hotswap and soldered
The BT65 and BT75 are stylised as btXX_v1 in order to maintain compatibility with customers existing zmk-config setups in the same way the BT60 V1 was handled when merged into main.
CKP boards have identical pinmapping between hotswap and soldered so there's only one set of defconfig, dts, keymap, yaml and yml files per size
* Update planck_rev6.keymap
Third layer was causing problems so i moved reset and bootloader to second layer
* BT_sel functions
A customer requested this so we added it
* Update crbn.keymap
Co-authored-by: Nick Winans <nick@winans.codes>
* Remove MISO pin from pinctrl for BDN9 rev2 board, to avoid
the 4th switch being set up for an alternate function, which
was causing spurious key press events to be triggered.
CONFIG_ZMK_BATTERY_NRF_VDDH and CONFIG_ZMK_BATTERY_VOLTAGE_DIVIDER are
now automatically enabled if a DT node with the matching "compatible"
property is present and enabled, so they no longer need to be manually
set for each board.
The key scanning drivers are now automatically enabled when a DT node
with the matching "compatible" property is present and enabled, so they
no longer need to be manually set for each board.
battery.c now uses the zmk,battery chosen node to select a battery
sensor. Using the node labeled "BATTERY" is maintained for backwards
compatibility but is now deprecated. Custom boards should switch to
using the chosen node.
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
# app/boards/arm/nice60/nice60.dts
# app/boards/arm/nrfmicro/nrfmicro_13.dts
# Conflicts:
# app/boards/arm/bluemicro840/bluemicro840_v1.dts
* Document the Seeed(uino) XIAO interconnect
* Add metadata files for two upstream boards, XIAO and XIAO BLE.
* Add conf and overlay files to properly configure the boards
for ZMK use.
* initial commit
* initial commit
* Encode, OLED, and RGB Nice Nano support added as well as refining default keymap.
* tweaking keymap
* Prepared murphpad for PR. Includes adding support for second encoder, OLED, and underglow RGB
* Enabled OLED by default.
* Initial commit with settings updated to match schematic.
* Removing test directories.
* removed naked60 config files
* Fixed dogbone definitions to be full working for murphpad.
* Preparing S40NC for PR
* Removed the murphpad test files that were not supposed to be a part of this PR.
* Changing licensing to be from The ZMK Contributors.
* Changed the licensing in the keymap file to be from The ZMK Contributors
* Update s40nc.keymap
My Planck rev 6.1 would not register any keys without "col2row".
I also had to apply a matrix_transform in order to move them to the
correct position. Peeking into #228 helped for finding this.
I also add transforms for the 2u spacebar layouts.
This commits adds a delay of 20ms on initializing the external
power control driver. Previously, OLED's i2c driver is failing to
initialize the display. This commit fixes that issue.
Signed-off-by: Anthony Amanse <ghieamanse@gmail.com>
