This adds a new config value `ZMK_HID_SEPARATE_MOD_RELEASE_REPORT`
where, if enabled, the report for a key release is sent separately to
the accompanying modifier release signals, which are then sent in a
second report.
This fixes an issue where certain applications are unable to work with
implicitly modified keys (e.g. colon) due to them registering the
modifier release prior to the actual key release.
Have tested this on my personal keyboard and `wev` now shows the signals
in the correct order.
=> **Previously:** ```LSHIFT (pressed) -> colon (pressed) -> LSHIFT
(released) -> **semi**colon (released)```
=> **Now:** ```LSHIFT (pressed) -> colon (pressed) -> colon (released)
-> LSHIFT (released)```
(This time without accidental files)
* To avoid spurious CDC ACM instances when usint CDC ACM for something
other than logging, move to the approach used by Zephyr of using a
snippet to redirect console output to a CDC ACM node added by the
snippet. Remove all the existing static CDC ACM nodes.
* Add new `zmk-usb-logging` snippet that mirrors the upstream
`cdc-acm-logging` snippet, but still does our extra USB logging
configuration.
* Updated logging docs accordingly.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Split the toolchain setup into separate docker and native pages
and improve instructions to better refer to Zephyr docs in certain steps.
Also refactor to improve consistency and add virtualenv instructions.
---------
Co-authored-by: KemoNine <mcrosson@kemonine.info>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Use the correct property for extra GPIOs to
make active for the waker before going into soft
off state.
* Change header depth for easier navigation of the
soft off feature page.
Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com>
* Better naming for gpio-key behavior triggers.
* Tweaks to scanned behavior trigger to avoid bad semaphore use,
and reduce chance of issues with slowly scanned matrixes.
* Various code cleanups of style issues.
* Move to explicit enable of `ZMK_PM_SOFT_OFF` to turn
on the feature and use the behaviors, which matches
how other features work, and helps with split and
testing schemes.
Initial work on a soft on/off support for ZMK. Triggering soft off
puts the device into deep sleep with only a specific GPIO pin
configured to wake the device, avoiding waking from other key
presses in the matrix like the normal deep sleep.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Updated the section for troubleshooting split halves unable to pair now
that the settings_reset shield resets all settings and explicitly
disables CONFIG_ZMK_BLE:
- Added a note that all settings will be reset.
- Removed the section about immediately putting the halves into
bootloader mode to prevent pairing, as this is not necessary anymore.
- Added a note that you will not be able to see or pair the Bluetooth
keyboard until you have flashed regular firmware again.
- Added a sentence to clarify that you will need to re-pair the
keyboard to all host devices.
Also added some text describing common scenarios where this procedure
might be needed.
