* Add HID report/descriptor for a new report with mouse buttons,
and x/y/wheel deltas.
* New mouse key press behavior for press/release of mouse keys.
* Add constants for HID main item values (e.g. data/array/absolute)
* Define and use constants for our HID report IDs.
Added support for passkey display and passkey confirmation when
pairing. Passkey display is enabled automatically when a display is
enabled. Passkey confirm can be manually enabled if the keyboard has an
Enter key.
Updated the passkey entry code to require all 6 digits have been entered
before confirming and to support backspace to remove a digit.
Added a pairing screen for displays and refactored the display code to
allow for switching between multiple screens. The screens are now
initialized immediately instead of on the display work queue, because
widgets will read state from other files when they are initialized, and
this can only be done safely from the system queue. Blank on idle and
theme initialization are pulled out to separate files to simplify the
main file.
The pairing screen supports all three passkey modes:
- Passkey display just shows the passkey.
- Passkey confirm shows the passkey and an icon indicating that you
must press Enter to confirm.
- Passkey entry shows the current passkey entry state and shows an icon
indicating that you must press Enter to confirm once all 6 digits
have been entered. (If passkey display or confirm are supported, it
seems that Windows will always choose those over passkey entry, but
the pairing screen still supports this in case other OSes work
differently.)
Added configs for normal and large font sizes. The large font is used
for the passkey on the pairing screen on larger displays.
CONFIG_LV_FONT_DEFAULT is no longer used for the normal font size,
because setting a default value for it in display/Kconfig prevented
display shields from picking a more appropriate default.
* Add two new compatibles for macros that
take one or two parameters when bound in
a keymap.
* Use `¯o_param_1to1`, `¯o_param_1to2`, `¯o_param_2to1`,
and `¯o_param_2to2` control entries in the bindings for the macro
to have the next binding entry have it's values substituted.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Add new sensor behaviors that either take full bindings
add definition, or accept parameters when bound in the
keymap.
* Remove existing hard-coded key press sensor behavior
and instead leverage new generic sensor behaviors to
achieve the same functionality.
Co-authored-by: nick@conway.dev
* Move to ZephyrBuildConfig package based on Zephyr best practices.
* Support multiple shields properly, e.g. -DSHIELD="foo bar", which
allows using existing upstream shields like `ssd1306_128x64` along
with another ZMK shield.
* Properly *add* the "ZMK config" .conf file to the conf file list,
so that existing board .conf files in `app/boards/<board>.conf` are
properly honored still. Needed for overrides to usptream boards when
combined with a local `<shield>.conf` file.
* Add new API/status to track state of the
peripheral connection to the central.
* Add new peripheral status widget for displaying
the current status of the connection to
the central.
* Add strlcpy from public domain version.
* Leverage strlcpy to detect truncation of behavior dev strs, and log.
* Use `offsetof` for cleaner detection on peripheral side.
* GATT characteristic allowing passng data + behavior
label to invoke the behavior on the peripheral side.
* Behaviors have a locality setting to specify where they run.
* Build reset/power/RGB on peripheral.
This is a generalization of the existing concept of tri-layer support
that's already well known. Essentially, a conditional-layer
configuration activates a particular layer (the then-layer) when one or
more other layers (the if-layers) are activated.
This is commonly used on ortho keyboards to activate a third "adjust"
layer while the primary two layers ("lower" and "raise") are active.
* Fire an event w/ layer number, state, and timestamp
when a layer is activated/deactivated.
* Add `zmk_keymap_highest_layer_active()` query.
Co-authored-by: KemoNine <mcrosson@kemonine.info>
Added a new setting to remember the user's preferred endpoint. When both USB and
BLE are connected, the preferred endpoint will be used.
Added a new behavior to control this setting. It supports commands:
&end END_USB - Prefer USB output
&end END_BLE - Prefer BLE output
&end END_TOG - Toggle between USB and BLE
Added some utility functions and an event for tracking the state of the
USB connection.
Updated endpoints.c to select a single endpoint to send HID reports to
based on the status of the USB and BLE connections. Partially fixes#206.
Future commits will add a user setting to control which endpoint is used if
both USB and BLE are ready.
This PR adds support to control the external power output from controllers like nice!nano, nRFMicro etc
I have implemented based on my understanding of Pete suggestion on this feature.
Testing done:
Tested by enabling and disabling the ext_power from application and verified
Verified the application does not crash with boards that does not have ext_power support
Note:
I did not test this in nice!nano since I don't have the boards. Will get help from others once the behavior PR is up
Next Steps:
Create a behavior PR to control enable/disable ext_power
* New ZMK_SLEEP Kconfig symbol to enable the functionality.
* Switch to PORT events that allows wake from deep sleep.
* Initial basic power management policy, with idle ms,
and ignoring deep sleep if we detect a USB connection.
