Added a Kconfig option to enable SOC_DCDC_NRF52X_HV for nice_nano_v2
and mikoto. According to Nordic's documentation, the DC/DC regulator is
more efficient than the LDO regulator, so this is enabled by default.
The following boards do not support this mode and were not changed:
- nice_nano
- nice60
- nrfmicro_11, nrfmicro_13
- nrf52840_m2
- bluemicro840
I could not find schematics to confirm whether the following boards
support this mode:
- bt60_v1, bt60_v2
- bt65_v1
- bt75_v1
- corneish_zen_v1, corneish_zen_v2
- pillbug
- puchi_ble_v1
- s40nc
The devicetree pulls always add on to the extra pulls configured by toggle mode, so these should not have pulls defined in the devicetree. Saved ~200uA avg on another board with a 3t toggle switch
* Add dedicated init priority for the sideband kscan.
* Refactor sideband code for clarity.
* Tweaks to direct kscan for clarity.
* Make sideband behavior row optional for brevity.
* Allow overriding ZMK Uno sideband behaviors.
* Instead of gpio key behavior trigger, add new kscan driver that
decorates/wraps a given kscan driver and will invoke basic system
behavior assigned to a given row + column, without the need for keymap
mapping in the matrix transform, bypassing keymaps entirely.
* Better naming for gpio-key behavior triggers.
* Tweaks to scanned behavior trigger to avoid bad semaphore use,
and reduce chance of issues with slowly scanned matrixes.
* Various code cleanups of style issues.
* Move to explicit enable of `ZMK_PM_SOFT_OFF` to turn
on the feature and use the behaviors, which matches
how other features work, and helps with split and
testing schemes.
Added a new CONFIG_ZMK_SETTINGS_RESET_ON_START option which enables init
code to call zmk_settings_erase(), and changed the settings_reset shield
to use it instead of CONFIG_ZMK_BLE_CLEAR_BONDS_ON_START, so it now
resets all settings instead of just clearing BLE bonds.
CONFIG_ZMK_BLE_CLEAR_BONDS_ON_START is left in place for now in case
someone still needs it. It may be replaced in the future once we find a
better way to repair a broken split connection.
* Don't default heap mempool by default now that there's a dedicated
LVGL mempool
* Set proper defaults for CiZ display hardware/custom screen.
* Double the dedicated display thread stack size for CiZ.
Removed the label property from built-in behaviors, custom behaviors
defined in a few keymaps, and macros generated with ZMK_MACRO().
Now that node names are used to identify behaviors, and names only need
to be unique within the set of behaviors, the names of all behaviors
have been shortened to be similar to their original labels.
This means that any keymaps which reference behavior nodes by name
instead of by label will need to be updated. Keymaps typically use the
labels though, so most keymaps should be unaffected by this change.
