From c33570fe96d24d1c0c95488920b7fdd7bae3a3d0 Mon Sep 17 00:00:00 2001 From: retic1337 Date: Tue, 29 Dec 2020 18:04:05 -0800 Subject: [PATCH] More Formatting --- app/drivers/led/is31fl3733/is31fl3733.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/app/drivers/led/is31fl3733/is31fl3733.c b/app/drivers/led/is31fl3733/is31fl3733.c index e799b86c..69f15d5d 100644 --- a/app/drivers/led/is31fl3733/is31fl3733.c +++ b/app/drivers/led/is31fl3733/is31fl3733.c @@ -9,9 +9,9 @@ * led_on sets the leds state to on * led_off sets the leds state to off * set_brightness sets thepwm value for the specific led - * set_color will set leds based upon a led number and 3 + * set_color will set leds based upon a led number and 3 * values representing RGB this is applicable for uses - * where the leds are wired as shown in the datasheet + * where the leds are wired as shown in the datasheet * in "Figure 2 Typical Application Circuit (RGB)". * * struct device *dev = device_get_binding("IS31FL3733A"); @@ -21,13 +21,13 @@ * #define led 1 * uint8_t RGB[3] = (red, green, blue); * set_color(dev, led, 3, RGB); - * - * This would set the led in position (SW1,CS1) to the value + * + * This would set the led in position (SW1,CS1) to the value * of red, the led in position (SW2,CS1) to the value of - * green, and the led in position (SW3,CS1) to the value of + * green, and the led in position (SW3,CS1) to the value of * blue. Before this is ran the 3 corresponding leds need - * to be turned on first with the led_on call. - */ + * to be turned on first with the led_on call. + */ #include #include