kb01/zmk
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Update backlight.md

Browse source
This commit is contained in:
ReFil 2023-10-03 11:54:15 +01:00
parent a164685d5f
commit b89bf69b4f
1 changed files with 4 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
docs/docs/features/backlight.md
View file

@ -82,14 +82,14 @@ Then you have to add the following lines inside the root devicetree node on the
compatible = "pwm-leds";
label = "Backlight LEDs";
pwm_led_0 {
pwms = <&pwm0 45 10000 PWM_POLARITY_NORMAL>;
pwms = <&pwm0 0 10000 PWM_POLARITY_NORMAL>;
label = "Backlight LED 0";
};
};
};
```
The value inside `pwm_led_0` must be the same as you used before.
The value inside `pwm_led_0` after `&pwm0` must be the channel number. Since (`<ch0-pin>`) is used in the `&pwm0` node the channel in this example is 0.
In this example `10000` is the period of the PWM waveform, some drive circuitry might require different values, it could also be altered in the event the drive frequency is audible.
@ -175,6 +175,8 @@ Then you have to add the following lines inside the root devicetree node on the
};
```
The value inside `pwm_led_0` after `&pwm0` must be the channel number. Since (`PWM_OUT0`) is defined in the pinctrl node the channel in this example is 0.
In this example `10000` is the period of the PWM waveform, some drive circuitry might require different values, it could also be altered in the event the drive frequency is audible.
If your board uses a P-channel MOSFET to control backlight instead of a N-channel MOSFET, you may want to change `PWM_POLARITY_NORMAL` for `PWM_POLARITY_INVERTED`.