kb01/zmk
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Update docs/docs/config/kscan.md

Browse source 
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
This commit is contained in:
ReFil 2024-05-03 16:59:28 +00:00 • committed by GitHub
parent 6501e2adb3
commit 070d0e0e23
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 1 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
docs/docs/config/kscan.md
View file

@ -98,7 +98,7 @@ By default, a switch will drain current through the internal pull up/down resist
`toggle-mode` applies to all switches handled by the instance of the driver. To use a toggle switch with other, non-toggle, direct GPIO switches, create two instances of the direct GPIO driver, one with `toggle-mode` and the other without. Then, use a [composite driver](#composite-driver) to combine them. The state of the switch is read on power on, so if the switch is moved whilst the board is off this will get correctly interpreted by the driver.
When using `toggle-mode` the pull resistors get automatically set by the driver and should not be set in the devicetree. Assuming the common pole of the switch is connected to ground with an SP3T switch:
When using `toggle-mode` the pull resistors get automatically set by the driver and should not be set in the devicetree via GPIO flags. Assuming the common pole of the switch is connected to ground with an SP3T switch:
```dts
kscan_sp3t_toggle: kscan_sp3t_toggle {